Industrial Ethernet Switch - FL NAT 2008

Managed NAT Switch 2000, 8 RJ45 ports 10/100 Mbps, PROFINET Conformance-Class A, 1:1-NAT, Virtual NAT, IP-Masquerading


Product Details

Width 45 mm
Height 130 mm
Depth 115 mm

General Support by phone or on-site (fee is charged)
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Housing material Polycarbonate fiber reinforced

Mounting type DIN rail

Ethernet (RJ45)
Connection method RJ45
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps
Transmission physics Copper
Transmission length 100 m (per segment)
Signal LEDs Data receive, link status
No. of channels 8 (RJ45 ports)

Type Book type
Product type Switch
MTTF 507.8 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
246.55 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
56.66 Years (SN 29500 standard, temperature 55°C, operating cycle 100%)
Special properties 1:1-NAT, Virtual NAT, IP-Masquerading
Signal delay ≥ 6.5 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size)
Insulation characteristics
Protection class III (VDE 0106)
Switch functions
Diagnostic functions RMON History
LLDP (Link Layer Discovery Protocol)
ACD (Address Conflict Detection)
Basic functions Router for standard routing, NAT, 1:1-NAT and port forwarding
NAT functions 1:1-NAT
Port forwarding
PROFINET conformance class Conformance-Class A
Filter functions Quality of Service (8 priority classes)
Class of Service
VLAN (up to 8 VLANs)
IGMP Snooping/Querier (v1/v2)
Extended Multicast Filtering
IP parameterization DHCP-Client
DHCP server (port based)
MAC address table 8k
Management Web-based management (HTTP/HTTPS)
Role-based user management (LDAP, RADIUS)
Command-line interface (Telnet, SSH)
Redundancy MRP (Media Redundancy Protocol)
RSTP (Rapid Spanning Tree Protocol)
Status and diagnostic indicators LEDs: US (power supply), 2 LEDs per Ethernet port (Link/Activity and Speed)
Time synchronization SNTP (Simple Network Time Protocol)
Security functions
Basic functions Router for standard routing, NAT, 1:1-NAT and port forwarding

Local diagnostics US Supply voltage Green LED
LNK/ACT Link status Green LED
SPD Data transmission speed Green LED
Maximum power dissipation for nominal condition 4.86 W (At US = 18 V DC and 60°C ambient temperature)
Test voltage 500 V DC
Test section for one minute 500 V DC
Transmission medium Copper
Supply voltage 24 V DC (single)
Supply voltage range 18 V DC ... 32 V DC
Power supply connection via COMBICON, max. conductor cross section 1.5 mm²
Residual ripple 3.6 VPP (within the permitted voltage range)
Max. current consumption 0.35 A (At US = 18 V DC and 60°C ambient temperature)
Typical current consumption 180 mA (at US = 24 V DC and 25 °C ambient temperature)
Current consumption 180 mA

Connection method Screw connection
Note on the connection method Use only copper connecting cables providing the permitted temperature range (-40 °C ... 75 °C).
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Stripping length 7 mm

Degree of protection IP20
Ambient temperature (operation) 0 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Shock (operation) 30g (EN 60068-2-27)
Vibration (operation) 2g, according to IEC 60068-2-6
Air pressure (operation) 86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport) 86 kPa ... 108 kPa

Free from substances that could impair the application of coating Yes

UL, USA UL 61010-1, Ed.3 / UL 61010-2-201, Ed.1
UL, Canada CSA C22.2 NO.61010-2-201:14, Ed.1 / CSA C22.2 NO.61010-1-12, Ed.3

Conformance with EMC directives EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
EN 61000-6-2 EN 61000-6-4 (interference) Class A
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2

Status display LEDs: US (power supply), 2 LEDs per Ethernet port (Link/Activity and Speed)

Item number 2702881
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C23
Product Key DNN131
Catalog Page Page 328 (C-6-2019)
GTIN 4055626376622
Weight per Piece (including packing) 393 g
Weight per Piece (excluding packing) 393 g
Customs tariff number 85176200
Country of origin DE


ECLASS-9.0 19170106
ECLASS-10.0.1 19170401
ECLASS-11.0 19170401


ETIM 8.0 EC000734


UNSPSC 21.0 43222600


Approval ID: RU*-DE.*.B.00741/19

UL Listed

Approval ID: FILE E 238705

cUL Listed

Approval ID: FILE E 238705

cULus Listed

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

1:1 NAT, virtual NAT, IP masquerading, port forwarding
MRP client
Ambient temperature -40 °C ... 70 °C
DHCP client, DHCP server (port-based)
Flexible distribution into several LAN and WAN areas
Configuration memory
Slim design
Web-based management, SNMP
Easy and fast startup and commissioning with the FL NETWORK MANAGER software
Suitable for PROFINET and EtherNet/IP™ networks