RIF-0-OPT-24DC/230AC/1 - Solid-state relay module

Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 24 - 253 V AC/0.75 A

Product Details

The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.

Product type Solid-state relay module
Product family RIFLINE complete
Application Universal
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.19 W
Test voltage (Input/output) 2.5 kVrms (50 Hz, 1 min., input/output)
Air clearances and creepage distances between the power circuits
Rated insulation voltage 250 V AC
Rated surge voltage 4 kV

Rated actuating voltage UC 24 V DC
Voltage range with reference to UC 0.8 ... 1.2
Rated actuating current IC 8 mA
Input voltage range 19.2 V DC ... 28.8 V DC
"0" signal switching threshold in reference to UC < 0.4
"1" signal switching threshold in reference to UC > 0.8
Typical response time 10 ms
Typical turn-off time 10 ms
Status display Yellow LED
Protective circuit Freewheeling diode
Transmission frequency 10 Hz

Contact type 1 N/O contact
Design of digital output electronic
Output voltage range 24 V AC ... 253 V AC (50/60 Hz)
Limiting continuous current 750 mA (see derating curve)
Maximum inrush current 30 A (10 ms)
Min. load current 10 mA
Leakage current 1 mA (in off state)
Surge current 30 A AC (tp = 20 ms, at 25°C)
Phase angle cos phi min 0.5
Max. load value 4.5 A2s (tp = 10 ms, at 25 °C)
Surge voltage protection > 275 V
Voltage drop at max. limiting continuous current < 1 V
Output circuit 2-conductor, zero voltage switch
Protective circuit RCV circuit
Utilization category CB Scheme (IEC 60947-5-1) AC12, 0.75 A/250 V

Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16

Width 6.2 mm
Height 93 mm
Depth 66 mm

Flammability rating according to UL 94 V2 (Housing)

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Air clearances and creepage distances between the power circuits
Standards/regulations DIN EN 60947-5-1

Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any

Item number 2905295
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK652K
Catalog Page Page 323 (C-5-2019)
GTIN 4046356945431
Weight per Piece (including packing) 23.57 g
Weight per Piece (excluding packing) 22.008 g
Customs tariff number 85364110
Country of origin JP


ECLASS-9.0 27371604
ECLASS-10.0.1 27371604
ECLASS-11.0 27371604


ETIM 8.0 EC001504


UNSPSC 21.0 39122300


Approval ID: TR_TS_D_00573_c


Approval ID: TAA000018V


Approval ID: RU*C-DE.*08.B.00010

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products