1. Home
  2. Products
  3. Relays and optocouplers
  4. Solid-state relays and electromechanical relays
  5. RIF-4-RPT-LDP-24DC/3X21 - Relay Module

RIF-4-RPT-LDP-24DC/3X21 - Relay Module
2903278

Pre-assembled relay modules with Push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 3 changeover contacts. Input voltage: 24 V DC

Product Details

The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.

Product type Relay Module
Product family RIFLINE complete
Application Universal
Operating mode 100% operating factor
Mechanical service life approx. 107 cycles
Insulation characteristics
Insulation Basic insulation
Insulation characteristics
Insulation Basic insulation
Overvoltage category III
Pollution degree 2
Maximum power dissipation for nominal condition 1.34 W
Test voltage (Winding/contact) 2.5 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact) 2.5 kVrms (50 Hz, 1 min., contact/contact)
Rated insulation voltage 250 V AC
Rated surge voltage 4 kV
Coil side
Nominal input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC (20 °C)
Input voltage range in reference to UN see diagram
Typical input current at UN 56 mA
Typical response time 20 ms
Typical release time 20 ms
Coil voltage 24 V DC
Protective circuit Freewheeling diode
Operating voltage display Yellow LED
Switching
Contact type 3 changeover contacts
Type of switch contact Single contact
Drive and function monostable
Drive (polarity) bipolar
Contact material AgNi
Maximum switching voltage 440 V AC
250 V DC
Minimum switching voltage 10 V (24 mA)
Limiting continuous current 10 A (see diagram)
Maximum inrush current 50 A (20 ms, N/O contacts)
Min. switching current 10 mA (24 V)
Interrupting rating (ohmic load) max. 240 W (24 V DC)
124 W (48 V DC)
108 W (60 V DC)
52 W (110 V DC)
70 W (220 V DC)
2500 VA (250 V AC)
4000 VA (440 V AC)
3-phase motor load 1500 W
Motor load according to UL 508 1/3 HP, 120 V AC (single-phase AC motor)
1/2 HP, 240 V AC (single-phase AC motor)
1/2 HP, 240 V AC (three-phase induction motor)
Utilization category CB Scheme (IEC 60947-5-1) AC15, 1.5 A/240 V (N/O contact)
DC13, 2 A/240 V (N/O contact)
Coil side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG 26 ... 16 (solid)
26 ... 16 (flexible)
Contact side
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG 26 ... 14 (solid)
26 ... 14 (flexible)
Width 43 mm
Height 111 mm
Depth 90 mm
Drill hole
Diameter 3.2 mm
Flammability rating according to UL 94 V2 (Housing)
Ambient conditions
Degree of protection Relay base IP20 (Relay base)
RT I (Relay)
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Standards/regulations IEC 60947-5-1
Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any
Item number 2903278
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK652C
Catalog Page Page 351 (C-5-2019)
GTIN 4046356731652
Weight per Piece (including packing) 211 g
Weight per Piece (excluding packing) 211 g
Customs tariff number 85364110
Country of origin CN

ECLASS

ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601
ECLASS-12.0 27371601
ECLASS-13.0 27371601

ETIM

ETIM 8.0 EC001437

UNSPSC

UNSPSC 21.0 39122300

CSA

Approval ID: 76787

EAC

Approval ID: TR_TS_D_00573_c

DNV GL

Approval ID: TAA000018V

DNV GL

Approval ID: TAA000018V
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products