cULus Recognized
Approval ID: E60425-20181123| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| B | ||||
| 300 V | 15 A | 26 - 14 | ||
| F | ||||
| 300 V | 15 A | 26 - 14 | ||
| D | ||||
| 300 V | 10 A | 26 - 14 | ||
Printed circuit board terminal, nominal current: 24 A, rated voltage (III/2): 300 V, nominal cross section: 2.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: ICC..-TS2,5/..L5,0, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: H1L Slotted Phillips recess, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: light gray, Pin layout: Linear pinning, Solder pin [P]: 3.15 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. Product with pin output on left side
| Product type | Printed circuit board terminal | 
| Product family | ICC..-TS2,5/..L5,0 | 
| Product line | COMBICON Terminals M | 
| Number of positions | 4 | 
| Pitch | 5 mm | 
| Number of connections | 4 | 
| Number of rows | 1 | 
| Number of potentials | 4 | 
| Pin layout | Linear pinning | 
| Solder pins per potential | 1 | 
| Properties | |
| Nominal current IN | 24 A | 
| Nominal voltage UN | 300 V | 
| Rated voltage (III/3) | 250 V | 
| Rated surge voltage (III/3) | 4 kV | 
| Rated voltage (III/2) | 300 V | 
| Rated surge voltage (III/2) | 4 kV | 
| Rated voltage (II/2) | 600 V | 
| Rated surge voltage (II/2) | 4 kV | 
| Connection technology | |
| Nominal cross section | 2.5 mm² | 
| Interlock | |
| Locking type | without | 
| Conductor connection | |
| Connection method | Screw connection with tension sleeve | 
| Conductor cross-section rigid | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section flexible | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 26 ... 14 | 
| Conductor cross-section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² | 
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² | 
| 2 conductors with same cross section, solid | 0.14 mm² ... 0.75 mm² | 
| 2 conductors with same cross section, flexible | 0.14 mm² ... 0.75 mm² | 
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.75 mm² | 
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² | 
| Stripping length | 8 mm | 
| Drive form screw head | Slotted Phillips recess (H1L) | 
| Tightening torque | 0.5 Nm ... 0.6 Nm | 
| Mounting type | Wave soldering | 
| Pin layout | Linear pinning | 
| Processing notes | |
| Process | Wave soldering | 
| Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 | 
| Contact material | Cu alloy | 
| Surface characteristics | Tin-plated | 
| Metal surface terminal point (top layer) | Tin (Sn) | 
| Metal surface terminal point (middle layer) | Nickel (1.3 - 3 µm Ni) | 
| Metal surface contact area (top layer) | Tin (Sn) | 
| Metal surface contact area (middle layer) | Nickel (1.3 - 3 µm Ni) | 
| Metal surface soldering area (top layer) | Tin (Sn) | 
| Metal surface soldering area (middle layer) | Nickel (Ni) | 
| Material data - housing | |
| Color (Housing) | light gray (7035) | 
| Insulating material | PA | 
| Insulating material group | I | 
| CTI according to IEC 60112 | 600 | 
| Flammability rating according to UL 94 | V0 | 
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 | 
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 | 
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C | 
| Recommendation | Further information and detailed dimensions are available in the download area. | 
| Assembly note | For reliable conductor connection, always adhere to a defined tightening torque. During conductor connection (mounting), the terminal blocks must be supported (held with one hand, support on the housing). | 
| General | We recommend using a soldering frame. | 
| Pitch | 5 mm | 
| Width [w] | 25 mm | 
| Height [h] | 22.4 mm | 
| Length [l] | 24.9 mm | 
| Solder pin length [P] | 3.15 mm | 
| Pin dimensions | 0.8 x 1 mm | 
| PCB design | |
| Hole diameter | 1.4 mm | 
| Test for conductor damage and slackening | |
| Specification | IEC 60999-1:1999-11 | 
| Result | Test passed | 
| Repeated connection and disconnection | |
| Specification | IEC 60999-1:1999-11 | 
| Result | Test passed | 
| Pull-out test | |
| Specification | IEC 60999-1:1999-11 | 
| Conductor cross-section/conductor type/tractive force setpoint/actual value | 0.14 mm² / solid / > 10 N | 
| 0.14 mm² / flexible / > 10 N | |
| 2.5 mm² / solid / > 50 N | |
| 2.5 mm² / flexible / > 50 N | |
| Temperature-rise test | |
| Specification | IEC 60947-7-4:2019-01 | 
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. | 
| Short-time withstand current | |
| Specification | IEC 60947-7-4:2019-01 | 
| Insulation resistance | |
| Specification | IEC 60512-3-1:2002-02 | 
| Insulation resistance, neighboring positions | > 5 MΩ | 
| Air clearances and creepage distances | | |
| Specification | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 | 
| Insulating material group | I | 
| Comparative tracking index (IEC 60112) | CTI 600 | 
| Rated insulation voltage (III/3) | 250 V | 
| Rated surge voltage (III/3) | 4 kV | 
| minimum clearance value - non-homogenous field (III/3) | 3 mm | 
| minimum creepage distance (III/3) | 3.2 mm | 
| Rated insulation voltage (III/2) | 300 V | 
| Rated surge voltage (III/2) | 4 kV | 
| minimum clearance value - non-homogenous field (III/2) | 3 mm | 
| minimum creepage distance (III/2) | 1.6 mm | 
| Rated insulation voltage (II/2) | 600 V | 
| Rated surge voltage (II/2) | 4 kV | 
| minimum clearance value - non-homogenous field (II/2) | 3 mm | 
| minimum creepage distance (II/2) | 3.2 mm | 
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 | 
| Frequency | 10 - 150 - 10 Hz | 
| Sweep speed | 1 octave/min | 
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) | 
| Acceleration | 20 m/s² (60.1 Hz ... 150 Hz) | 
| Test duration per axis | 2.5 h | 
| Test directions | X-, Y- and Z-axis | 
| Glow-wire test | |
| Specification | IEC 60695-2-10:2013-04 | 
| Temperature | 850 °C | 
| Time of exposure | 5 s | 
| Aging | |
| Specification | IEC 60947-7-4:2019-01 | 
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) | 
| Ambient temperature (storage/transport) | -40 °C ... 55 °C | 
| Relative humidity (storage/transport) | 30 % ... 70 % | 
| Ambient temperature (assembly) | -5 °C ... 100 °C | 
| Type of packaging | packed in cardboard | 
| Item number | 1380293 | 
| Packing unit | 50 pc | 
| Minimum order quantity | 50 pc | 
| Sales key | AC08 | 
| Product key | ACHAFA | 
| GTIN | 4063151751005 | 
| Weight per piece (including packing) | 10.07 g | 
| Weight per piece (excluding packing) | 8.7 g | 
| Customs tariff number | 85369010 | 
| Country of origin | PL | 
| ECLASS-13.0 | 27460101 | 
| ECLASS-15.0 | 27460101 | 
| ETIM 9.0 | EC002643 | 
| EU RoHS | |
| Fulfills EU RoHS substance requirements | Yes (No exemptions) | 
| China RoHS | |
| Environment friendly use period (EFUP) | EFUP-E No hazardous substances above the limits | 
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | No substance above 0.1 wt% |