1. Home
  2. Products
  3. PCB terminal blocks and PCB connectors
  4. PCB connectors
  5. Direct connector - CDDC 2,5/10-PV-5,0
The figure shows a 10-pos. version with 20 contacts
Type: CDDC 2,5/...-PV-5,0

Direct connector - CDDC 2,5/10-PV-5,0
1016279

PCB direct plug, nominal cross section: 2.5 mm2, color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, number of potentials: 20, number of rows: 2, number of positions: 10, number of connections: 20, product range: CDDC 2,5/..-PV, pitch: 5 mm, connection method: Crimp connection, conductor/PCB connection direction: 90 °, plug-in system: SKEDD, locking: Snap-in locking, mounting: Self-locking flange, type of packaging: packed in cardboard

Product Details

Product line COMBICON Connectors M
Product type PCB direct plug
Number of positions 10
Pitch 5 mm
Number of connections 20
Number of rows 2
Mounting flange Self-locking flange
Number of potentials 20
Nominal current IN 12 A
Nominal voltage UN 320 V
Pollution degree 3
Contact resistance 1.4 mΩ
Rated voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
Rated voltage (III/2) 320 V
Rated surge voltage (III/2) 4 kV
Connection technology
Connector system SKEDD
Nominal cross section 2.5 mm²
Interlock
Locking type Snap-in locking
Mounting flange Self-locking flange
Conductor connection
Connection method Crimp connection
Connection direction of the conductor to plug-in direction 0 °
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Mounting type SKEDD - Direct plug-in technology SKEDD - Direct plug-in technology
Mounting type SKEDD - Direct plug-in technology
Material data - housing
Housing color green (6021)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Material data – actuating element
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN 60695-2-12 850
Glow wire ignition temperature GWIT according to EN 60695-2-13 775
Temperature for the ball pressure test according to EN 60695-10-2 125 °C
Note on the contact The information on the basic material and the finish properties of the crimp contacts is to be found in the E-Shop in the technical data for the respective crimp contact.
Note on application All laboratory tests are performed in combination with the crimp contacts specified as accessories.
Note on application The current depends on the crimp contact and conductor cross section used.
Note on application The corresponding crimp contacts are to be found in the "Accessories" tab.
Note on application The crimp contacts may only be processed with approved crimping tools.
Dimensional drawing
Pitch 5 mm
55.8 mm
Height h 19.6 mm
Length l 13 mm
Installed height 16 mm
PCB design
Pin spacing 7.00 mm
Tensile strength of crimp connections
Result Test passed
Conductor cross section/conductor type/tractive force setpoint/actual value 0.14 mm² / flexible / > 18 N
Insertion and withdrawal forces
Result Test passed
No. of cycles 25
Insertion strength per pos. approx. 4 N
Withdraw strength per pos. approx. 3 N
Contact holder in insert
Specification IEC 60512-15-1:2008-05
Contact holder in insert
Requirements >20 N		 Test passed
Resistance of inscriptions
Specification IEC 60068-2-70:1995-12
Result Test passed
Polarization and coding
Specification IEC 60512-13-5:2006-02
Result Test passed
Visual inspection
Specification IEC 60512-1-1:2002-02
Result Test passed
Dimension check
Specification IEC 60512-1-2:2002-02
Result Test passed
Thermal test | Test group C
Specification IEC 60512-5-1:2002-02
Tested number of positions 16
Insulation resistance
Specification IEC 60512-3-1:2002-02
Insulation resistance, neighboring positions > 5 MΩ
Air clearances and creepage distances |
Specification IEC 60664-1:2007-04
Insulating material group I
Comparative tracking index (IEC 60112) CTI 600
Rated insulation voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
minimum clearance value - non-homogenous field (III/3) 3 mm
minimum creepage distance (III/3) 3.2 mm
Rated insulation voltage (III/2) 320 V
Rated surge voltage (III/2) 4 kV
minimum clearance value - non-homogenous field (III/2) 3 mm
minimum creepage distance (III/2) 3 mm
Rated insulation voltage (II/2) 630 V
Rated surge voltage (II/2) 4 kV
minimum clearance value - non-homogenous field (II/2) 3 mm
minimum creepage distance (II/2) 3.2 mm
Vibration test
Specification IEC 60068-2-6:2007-12
Frequency 10 - 150 - 10 Hz
Sweep speed 1 octave/min
Amplitude 0.35 mm (10 - 60.1 Hz)
Sweep speed 50 m/s² (60.1 - 150 Hz)
Test duration per axis 2.5 h
Durability test
Specification IEC 60512-9-1:2010-03
Impulse withstand voltage at sea level 4.8 kV
Contact resistance R1 1.4 mΩ
Contact resistance R2 1.4 mΩ
Insertion/withdrawal cycles 25
Insulation resistance, neighboring positions > 5 MΩ
Climatic test
Specification ISO 6988:1985-02
Corrosive stress 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Thermal stress 105 °C/168 h
Power-frequency withstand voltage 2.21 kV
Shocks
Specification IEC 60068-2-27:2008-02
Pulse shape Semi-sinusoidal
Acceleration 300 m/s²
Shock duration 18 ms
Test directions X-, Y- and Z-axis (pos. and neg.)
Ambient conditions
Ambient temperature (operation) -55 °C ... 105 °C (dependent on the derating curve)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Relative humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 100 °C
Type of packaging packed in cardboard
Item number 1016279
Packing unit 1 pc
Minimum order quantity 50 pc
Sales Key A01
Product Key AACDAA
GTIN 4055626497389
Weight per Piece (including packing) 5.87 g
Weight per Piece (excluding packing) 5.13 g
Customs tariff number 85472000
Country of origin DE

ECLASS

ECLASS-9.0 27440309
ECLASS-10.0.1 27440309
ECLASS-11.0 27460202

ETIM

ETIM 8.0 EC002638

UNSPSC

UNSPSC 21.0 39121400

cULus Recognized

Approval ID: E60425-20160718
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
Use group B
Standard 300 V 12 A 26 - 12
Use group D
Standard 300 V 10 A 26 - 12
Alternative 1 150 V 12 A 26 - 12

IECEE CB Scheme

Approval ID: DE1-63213

VDE Zeichengenehmigung

Approval ID: 40044617
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
320 V 12 A 0.14 - 2.5

UL Recognized

Approval ID: E60425-20160718
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
Use group F
250 V 12 A 16 - 12
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Compatible Products

  1. Coding profile CP-PT 1,5 - 1985564

  2. Crimp contact CDC-MP 0,14-0,5 - 1016664

  3. Crimp contact CDC-MP 0,14-0,5-R - 1016663

  4. Crimp contact CDC-MP 0,5-1,5 - 1016662

  5. Crimp contact CDC-MP 0,5-1,5-R - 1016661

  6. Crimp contact CDC-MP 1,5-2,5 - 1016660

  7. Crimp contact CDC-MP 1,5-2,5-R - 1016659

Your advantages

SKEDD direct plug-in technology enables flexible positioning on the PCB
Reduced component and process costs: simple insertion by hand and vibration-resistant connection
Contacts arranged in a double row enable high packing density in a compact area
Wide range of applications, thanks to suitability for PCBs with chemically tin-plated or Hot Air Leveling (HAL) surface
Cost-effective connection of crimped conductors in large quantities
Tools for manual and automatic crimping available as an option