The MCS empty enclosure is an all-rounder that provides more than just space. With this plastic housing, Phoenix Contact offers a modular monitoring case system (MCS) for a wide range of electronic applications in industry and building technology. The empty enclosure is impressive on all levels: from the fast installation of the PCB and easy mounting to the easy maintenance of the device.
More information
Housing frame, Design element with marking field, color: blue (similar RAL 5015)
Housing frame, Latching cover (non-detachable), color: blue (similar RAL 5015)
Adapter plate, color: light gray (similar RAL 7035), dimensions: 161.2 x 131.8 x 23.2 mm
Housing frame, Hinged cover (transparent), color: yellow (similar RAL 1018)
Housing frame, Latching cover (non-detachable), color: yellow (similar RAL 1018)
Housing frame, Design element with marking field, color: yellow (similar RAL 1018)
Housing frame, Latching cover (non-detachable), color: light gray (similar RAL 7035)
Electronics housing, color: light gray (similar RAL 7035), degree of protection: IP40, dimensions: 156 x 127 x 65 mm, includes upper housing part, lower housing part, screws for housing and PCB mounting
PCB screws for attaching a second PCB in the MCS housings, TORX 2.5x8
Film hinge, color: orient red (similar RAL 3031), dimensions: 9.2 x 4.2 x 40 mm
Phoenix Contact offers a well-designed housing for diverse electronics with its new MCS series. It is sure to impress at all stages, from installation of the PCB and simple mounting to maintenance of the device. Modular in design, the housing offers exceptional practicality.
The MCS (Monitoring Case System) electronics housing satisfies the trend towards increasing device networking in industry and building automation. Benefit from the variability of this plastic empty housing.
| MCS electronics housings | |
|---|---|
| Housing sizes | Three sizes each in two IP versions: IP40 and IP65/IP67 (additionally with seal and DAE) |
| Temperature range | -40°C to +85°C |
| Material | PA with GF (UL94 V0) |
| Colors | Light gray (RAL 7035), also available in yellow (RAL 1018), blue (RAL 5015), and black (RAL 9005) |
| Shock resistance | IK07 |
Configure your desired housing from the Monitoring Case System kit for your sensor or IIoT application. Select options such as the IP degree of protection, housing size, cover versions, color, etc.
The electronics housings are available in IP40 or IP65/IP67 versions for coordination with the respective application. This means that even demanding requirements in building technology and industry can be met.
The housing achieves its convenient operation through design details such as the special hinges, which can even be retrofitted. Once these hinges are installed, the housing can open like a fan. The cover remains connected, your hands stay free.
The housing can be mounted in a range of ways. By optionally combining it with an adapter plate, the electronics housing can be latched securely and tool-free on aluminum extrusions, flush-mounted sockets, masts, walls, and even DIN rails.
The modular system enables individual, tailored housings. The process includes selecting from various factors such as IP degree of protection, size, color, and cover versions in the configurator. The housing is supplemented by additional accessories.
Installation of the PCB in a nearly horizontal orientation is possible due to the angled housing edge. Preassembled connectors thus slide through the holes in the housing. Positive effect: the connection technology can be easily sealed on the tall side panel. The base area can therefore be used almost completely for the PCB.
Product manager Lisa Picherer explains the advantages of the innovative MCS (Monitoring Case System) series electronics housing in detail in a technical discussion. She explains the aspects of the new empty housings that be beneficial for device manufacturers and installers alike.
The permanently installed seal provides proper closure. Plus, the seal stays on the housing and cannot be lost.
The pressure compensation element is already preinstalled for the housing versions that meet IP67/IP65.
The housing can be mounted on walls, masts, aluminum extrusions, or even DIN rails. An optional adapter plate makes this possible.
Mounting is tool-free. The housing is latched onto the adapter plate during mounting. You can also secure the housing with screws (can be ordered separately). To remove the housing, remove the screws (if used) and use a screwdriver or similar to lever out the latchings over the recesses of the adapter plate.
You can create your individual housings using the modular system. Several RAL colors are available. In addition, different frame versions and other accessories can be combined with versatility. Ask about other customer-specific customization options.
