D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2
2708232

D-SUB connector, 9-pos., male connector, 35° cable entry, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks


Product Details


The D-SUB series, SUBCON-PLUS-PROFIB/... was specially designed for use in PROFIBUS systems up to 12 Mbps. Under field conditions, it allows convenient and fast connection of the incoming and outgoing bus cable. The terminating resistor is already integrated in all versions. It can be connected externally by means of a slide switch. At the same time, the outgoing bus segment is switched off. This makes it easy to start up segment by segment while incorrect terminations are avoided. A special feature of the 35° angled connector is that the internal connection unit can be turned round. Whether the cable is to be inserted from the right or left can thus be decided on-site.



Utilization restriction
CCCex note Use in potentially explosive areas is not permitted in China.

Product type Data plug
MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment 3, 5, 6, 8

Maximum power dissipation for nominal condition 0.025 W
Nominal voltage UN 5 V
Nominal current IN 100 mA
Transmission medium Copper

D-SUB connection
Connection method D-SUB connector
D-SUB connection
Connection method Screw connection
Stripping length 5 mm
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1 mm²

Bus system PROFIBUS DP
Signal PROFIBUS

Dimensional drawing
Width 16.6 mm
Height 39.4 mm
Length 58 mm
External dimensions
External diameter min. 7.6 mm
External diameter max. 8.4 mm

Housing material ABS, metal-plated

Insertion/withdrawal cycles > 200

Ambient conditions
Degree of protection IP40
Ambient temperature (operation) -20 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

EAC
Designation EAC
Identification EAC
EAC
Designation ATEX
Identification  II 3 G Ex nA IIC T4 Gc X
Note Please follow the special installation instructions in the documentation!
EAC
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard

Item number 2708232
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C19
Product Key DNC531
Catalog Page Page 446 (C-6-2019)
GTIN 4017918960483
Weight per Piece (including packing) 50.6 g
Weight per Piece (excluding packing) 49.7 g
Country of origin DE


ECLASS

ECLASS-9.0 27440302
ECLASS-10.0.1 27440302
ECLASS-11.0 27440302

ETIM

ETIM 8.0 EC001132

UNSPSC

UNSPSC 21.0 39121400

cUL Recognized

Approval ID: FILE E 238705

UL Recognized

Approval ID: FILE E 238705

CSA

Approval ID: 2437602

ATEX

Approval ID: PxCIF15ATEX2744348X

cULus Recognized


China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Your advantages

Termination resistor can be connected
Screw connection
Cable entry under 35°
Change to the D-SUB orientation through a reversible connection block
Metal housing for high level of immunity to interference at maximum transmission speed
Vibration and shock resistance according to EN 50155
Suitable for all common Fast Connect PROFIBUS cables and RS-485 bus lines