D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/IDC
2313685

D-SUB connector, 9-pos., male connector, 90° cable entry, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection


Product Details


The D-SUB series, SUBCON-PLUS-PROFIB/... was specially designed for use in PROFIBUS systems up to 12 Mbps. Under field conditions, it allows convenient and fast connection of the incoming and outgoing bus cable. The terminating resistor is already integrated in all versions. It can be connected externally by means of a slide switch. At the same time, the outgoing bus segment is switched off. This makes it easy to start up segment by segment while incorrect terminations are avoided.



Product type Data plug
MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment 3, 5, 6, 8

Test voltage 50 V
Maximum power dissipation for nominal condition 0.025 W
Nominal voltage UN 5 V
Nominal current IN 100 mA

D-SUB connection
Connection method D-SUB connector
D-SUB connection
Conductor cross section solid min. 0.32 mm²
Conductor cross section solid max. 1 mm²
Conductor cross section flexible min. 0.32 mm²
Conductor cross section flexible max. 1 mm²
D-SUB connection
Connection method D-SUB socket

Bus system PROFIBUS DP
Signal PROFIBUS

Dimensional drawing
Width 16.8 mm
Height 34.8 mm
Length 72 mm
External dimensions
External diameter min. 7.6 mm
External diameter max. 8.4 mm

Housing material ABS, metal-plated

Insertion/withdrawal cycles > 200

Ambient conditions
Degree of protection IP40
Ambient temperature (operation) -20 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 80 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

EAC
Designation EAC
Identification EAC
EAC
Designation Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard

Item number 2313685
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C19
Product Key DNC531
Catalog Page Page 447 (C-6-2019)
GTIN 4046356514576
Weight per Piece (including packing) 45.3 g
Weight per Piece (excluding packing) 41 g
Customs tariff number 85366990
Country of origin DE


ECLASS

ECLASS-9.0 27440302
ECLASS-10.0.1 27440302
ECLASS-11.0 27440302

ETIM

ETIM 8.0 EC001132

UNSPSC

UNSPSC 21.0 39121400

cUL Recognized

Approval ID: FILE E 238705

UL Recognized

Approval ID: FILE E 238705

CSA

Approval ID: 2437602

cULus Recognized


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Suitable for all common Fast Connect PROFIBUS cables and RS-485 bus lines