PLC-OSP- 24DC/300DC/  1
   - 
  Solid-state relay module
    
      2980830
      
      
    
  
      PLC-INTERFACE, integrated solid-state relay, with spring-cage connection, for mounting on NS 35/7,5 DIN rails, input: 24 V DC, output: 12 - 300 V DC/1 A
Product details
| Product type | Solid-state relay module | 
| Product family | PLC-INTERFACE | 
| Application | With integrated solid-state relay | 
| Operating mode | 100% operating factor | 
| Insulation characteristics: Standards/regulations | |
| Insulation | Basic insulation | 
| Overvoltage category | III | 
| Pollution degree | 2 | 
| Data management status | |
| Date of last data management | 15.09.2025 | 
| Maximum power dissipation for nominal condition | 0.19 W | 
| Standards/regulations | |
| Rated insulation voltage | 300 V | 
| Rated surge voltage | 2.5 kV | 
| Nominal input voltage UN | 24 V DC | 
| Input voltage range in reference to UN | 0.8 ... 1.2 | 
| Input voltage range | 19.2 V DC ... 28.8 V DC | 
| Switching threshold "0" signal in reference to UN | ≤ 0.4 | 
| Switching threshold "1" signal in reference to UN | ≥ 0.8 | 
| Typical input current at UN | 8 mA | 
| Typical response time | 0.3 ms | 
| Typical turn-off time | 0.7 ms | 
| Operating voltage display | Yellow LED | 
| Protective circuit | Reverse polarity protection; Polarity protection diode | 
| Surge protection; Varistor | |
| Transmission frequency | 50 Hz | 
| Designation | Output data | 
| Contact switching type | 1 N/O contact | 
| Design of digital output | electronic | 
| Output voltage range | 12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) | 
| Limiting continuous current | 1 A (see derating curve) | 
| Voltage drop at max. limiting continuous current | < 500 mV | 
| Protective circuit | Reverse polarity protection; Polarity protection diode | 
| Surge protection; Varistor | 
| Input side | |
| Connection method | Spring-cage connection | 
| Stripping length | 8 mm | 
| Conductor cross-section rigid | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section flexible | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 26 ... 14 | 
| Output side | |
| Connection method | Spring-cage connection | 
| Stripping length | 8 mm | 
| Conductor cross-section rigid | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section flexible | 0.14 mm² ... 2.5 mm² | 
| Conductor cross-section AWG | 26 ... 14 | 
| Width | 6.2 mm | 
| Height | 80 mm | 
| Depth | 86 mm | 
| Color | green (RAL 6021) | 
| Flammability rating according to UL 94 (Housing) | V0 (Housing) | 
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C | 
| Ambient temperature (storage/transport) | -40 °C ... 85 °C | 
| Standards/regulations | |
| Standards/regulations | IEC 60664 | 
| EN 50178 | |
| Mounting type | DIN rail mounting | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any | 
| Item number | 2980830 | 
| Packing unit | 10 pc | 
| Minimum order quantity | 1 pc | 
| Note | Made to order (non-returnable) | 
| Sales key | CK6 | 
| Product key | DK6223 | 
| GTIN | 4046356051569 | 
| Weight per piece (including packing) | 31.48 g | 
| Weight per piece (excluding packing) | 29.2 g | 
| Customs tariff number | 85364190 | 
| Country of origin | DE | 
| China RoHS | |
| Environment friendly use period (EFUP) | 
              EFUP-50
               An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. 
             | 
          
| EU REACH SVHC | |
| REACH candidate substance (CAS No.) | No substance above 0.1 wt% | 
Compatible products
            Note: Applying some accessories below might limit this product.
          
          
        - 
    
      
 - 
    
      
FBST 500-PLC BU - Continuous plug-in bridge 2966692
 - 
    
      
FBST 500-PLC GY - Continuous plug-in bridge 2966838
 - 
    
      
FBST 6-PLC RD - Single plug-in bridge 2966236
 - 
    
      
FBST 6-PLC BU - Single plug-in bridge 2966812
 - 
    
      
FBST 6-PLC GY - Single plug-in bridge 2966825
 - 
    
      
FBST 8-PLC GY - Single plug-in bridge 2967688
 - 
    
      
FBST 14-PLC BK - Single plug-in bridge 2967691
 - 
    
      
NS 35/ 7,5 V2A UNPERF 2000MM - DIN rail, unperforated 0801377
 - 
    
      
NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733
 - 
    
      
NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762
 - 
    
      
NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714
 - 
    
      
NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895
 - 
    
      
NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798
 - 
    
      
NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756
 - 
    
      
NS 35/15 PERF 2000MM - DIN rail perforated 1201730
 - 
    
      
NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681
 - 
    
      
PLC-ESK GY - Power terminal block 2966508
 - 
    
      
PLC-ATP BK - Separating plate 2966841
 - 
    
      
SZF 1-0,6X3,5 - Screwdriver 1204517
 - 
    
      
PLC-V8/FLK14/OUT - System connection 2295554
 - 
    
      
PLC-V8/FLK14/OUT/M - System connection 2304102
 - 
    
      
PLC-V8/D15S/OUT - System connection 2296058
 - 
    
      
PLC-V8/D15B/OUT - System connection 2296061
 
Your advantages
Wear-free switching with no contact bounce
        Resistant to vibrations and shocks
        Protective circuit in input and output
        Status indicator
        DC voltage outputs up to 300 V DC/1 A
        Option of bridging adjacent modules