RL-EE-IR/L- 24AC/2X21 - Single relay

1585399

Basic plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switching position indicator, polarity A1+, A2-, input voltage: 24 V AC

This product needs further products for operation. Mandatory accessories

Notes on operation	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Notes on operation	The outputs are not suitable for switching different outer conductors.
Notes on operation	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.

Product type	Single relay
Product family	ESSENTIAL edition
Operating mode	100% operating factor
Mechanical service life	1x 10⁷ cycles, approximately
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
Overvoltage category	II
Pollution degree	2
Data management status
Date of last data management	24.11.2025

Test voltage	2.5 kV_rms (50 Hz, 1 min.)
	1 kV_rms (50 Hz, 1 min.)
	2 kV_rms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV

Coil side
Nominal input voltage U_N	24 V AC
Input voltage range	19.2 V AC ... 26.4 V AC (20 °C)
Mains frequency	50/60 Hz
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	55.8 mA
Input power dissipation for U_N	1.3 W
Typical response time	12 ms
Typical release time	7 ms
Coil voltage	24 V AC
Status display	LED (yellow)

Switching
Contact switching type	2 changeover contacts
Type of switch contact	Single contact
Contact material	AgNi
Maximum switching voltage	250 V AC
	300 V DC
Minimum switching voltage	12 V (10 mA)
Limiting continuous current	12 A
Maximum inrush current	24 A (20 ms, N/O contacts)
Min. switching current	10 mA (12 V)
Interrupting rating (ohmic load) max.	288 W (24 V DC)
	130 W (48 V DC)
	90 W (60 V DC)
	66 W (110 V DC)
	88 W (220 V DC)
	90 W (300 V DC)
	3000 VA (250 V AC)
Switching power min.	0.12 W
Switching capacity	4 A (24 V (DC13))
	2 A (250 V, AC15)

Ambient conditions
Degree of protection	RT I
	≥ IP54
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 2000 m

Standards/regulations	IEC 61810-1
Air clearances and creepage distances between the power circuits
Standards/regulations	IEC 60664-1

Mounting type	Plug-in mounting
Assembly note	in rows with zero spacing
Mounting position	any

Item number	1585399
Packing unit	10 pc
Minimum order quantity	10 pc
Product key	DKF943
GTIN	4067923141308
Weight per piece (including packing)	33 g
Weight per piece (excluding packing)	33 g
Country of origin	Country of origin will be provided upon delivery.

Compatible products

Mandatory accessories

Accessories

ECLASS-13.0	27371601
ECLASS-15.0	27371601

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RL-EE-IR/L- 24AC/2X21 - Single relay

1585399

Product details

ECLASS

ETIM

cULus Recognized

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RL-EE-IR/L- 24AC/2X21 - Single relay 1585399

Product details

ECLASS

ETIM

Compatible products

ECOR-2-BSC2-RT/2X21 - Relay base 2908341

ECOR-2-BSC3/4X21 - Relay base 2907521

ECOR-2-BSC2/4X21 - Relay base 1089994

RL-EE-IR/L- 24AC/2X21 - Single relay

1585399