Basic plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switching position indicator, polarity A1+, A2-, input voltage: 220 V DC
Product details
Product type
Single relay
Product family
ESSENTIAL edition
Operating mode
100% operating factor
Mechanical service life
1x 107 cycles, approximately
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation
Basic insulation
Overvoltage category
II
Pollution degree
2
Data management status
Date of last data management
05.09.2025
Air clearances and creepage distances between the power circuits
Rated insulation voltage
250 V AC
Rated surge voltage
4 kV
Coil side
Nominal input voltage UN
220 V DC
Input voltage range
176 V DC ... 242 V DC
Drive and function
monostable
Drive (polarity)
polarized
Typical input current at UN
5.6 mA
Input power dissipation for UN
1.2 W
Typical response time
12 ms
Typical release time
7 ms
Coil voltage
220 V DC
Switching
Contact switching type
4 changeover contacts
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC
300 V DC
Minimum switching voltage
12 V (10 mA)
Limiting continuous current
6 A
Maximum inrush current
12 A (20 ms, N/O contacts)
Min. switching current
10 mA (12 V)
Interrupting rating (ohmic load) max.
144 W (24 V DC)
130 W (48 V DC)
90 W (60 V DC)
66 W (110 V DC)
88 W (220 V DC)
90 W (300 V DC)
1500 VA (250 V AC)
Switching capacity min.
0.12 W
Switching capacity
4 A (24 V (DC13))
2 A (250 V, AC15)
Ambient conditions
Degree of protection
RT I
≥ IP54
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Altitude
≤ 2000 m
Standards/regulations
IEC 61810-1
Air clearances and creepage distances between the power circuits
