PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Bridge rectifier, Input voltage: 230 V AC / 220 V DC
Product details
Product type
Relay Module
Product family
PLC-INTERFACE
Application
Palm switch
High continuous currents
Operating mode
100% operating factor
Mechanical service life
5x 106 cycles
Insulation characteristics
Insulation
Safe isolation, reinforced insulation
Overvoltage category
III
Pollution degree
2
Data management status
Date of last data management
06.07.2025
Maximum power dissipation for nominal condition
1.15 W
Test voltage (Winding/contact)
4 kVrms (50 Hz, 1 min., winding/contact)
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Coil side
Nominal input voltage UN
230 V AC
220 V DC
Input voltage range
207 V AC ... 264.5 V AC (20 °C)
209 V DC ... 264 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)
110 V DC
Drive and function
monostable
Drive (polarity)
polarized
Typical input current at UN
5 mA
Typical response time
6 ms (220 V DC)
3 ms ... 15 ms (230 V AC)
Typical release time
8 ms (220 V DC)
Typical release time range
3 ms ... 15 ms (230 V AC)
Protective circuit
Bridge rectifier; Bridge rectifier
Operating voltage display
Yellow LED
Switching
Contact switching type
1 changeover contact
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
12 V (10 mA)
Limiting continuous current
10 A
Maximum inrush current
24 A (20 ms)
Min. switching current
10 mA (12 V)
Interrupting rating (ohmic load) max.
264 W (24 V DC)
62 W (48 V DC)
48 W (60 V DC)
52 W (110 V DC)
66 W (220 V DC)
2750 VA (250 V AC)
Switching capacity
2 A (24 V (DC13))
3 A (230 V, AC15)
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.6 Nm ... 0.8 Nm
Width
14 mm
Height
80 mm
Depth
104 mm
Color
gray (RAL 7042)
Flammability rating according to UL 94 (Housing)
V0 (Housing)
Ambient conditions
Degree of protection (Relay)
RT II (Relay)
Degree of protection (Relay base)
IP20 (Relay base)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
-40 °C ... 50 °C
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Altitude
≤ 2000 m
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
Shipbuilding approval
Certificate
TAE0000196
UL, USA
Identification
UL 508
UL 508 Recognized
UL, USA/Canada
Identification
UL 508
UL 508 Recognized
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Shipbuilding data
Temperature
D
Humidity
A
Vibration
B/C
EMC
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Electromagnetic compatibility
Conformance with EMC directive
Low Voltage Directive
Conformance with Low Voltage Directive
Standards/regulations
IEC 60947-5-1
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Item number
2910518
Packing unit
10 pc
Minimum order quantity
1 pc
Note
Made to order (non-returnable)
Sales key
CK6
Product key
DK623A
GTIN
4055626486703
Weight per piece (including packing)
82.1 g
Weight per piece (excluding packing)
67 g
Customs tariff number
85364900
Country of origin
DE
ECLASS
ECLASS-13.0
27371601
ETIM
ETIM 9.0
EC001437
UNSPSC
UNSPSC 21.0
39122300
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)
Hexahydromethylphthalic anhydride(CAS: n/a)
Lead(CAS: 7439-92-1)
SCIP
66adc551-5271-4917-ad66-b55f8d1a2f81
Compatible products
Note: Applying some accessories below might limit this product.
