Device connector, front mounting - PV-FT-CF-C-4-130-BU

Panel feed-through, Range of articles: Sunclix, Device connector, front mounting, housing material: PPE, color: black, min. conductor cross section: 4 mm2, Connection method: Crimp, Type of contact: Socket, cable length: 130

Product Details

Safety note
Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at under the product
• The installation notes/Design In documents online on the download page at must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product type Panel feed-through
Insertion force 45 N ±10 N
Insulation characteristics
Protection class II
Degree of pollution 2

Dimensional drawing
Width 18.6 mm
Height 18.6 mm
Length 43.2 mm

Rated voltage (III/2) 1000 V
Rated surge voltage (III/2) 12 kV
Rated current (4.0 mm²) 35 A
Contact resistance 0.45 mΩ

Mechanical data
Insertion force 45 N ±10 N
Withdrawal force 250 N ±50 N

Color black
Color of the housing part black
Flammability rating according to UL 94 V0
Insulating material group III
Seal material EPDM
Insulating material mPPE
Contact surface Silver Ag
Cable seal material Elastosil LR 3065/50
Contact material Cu
Contact surface material Ag
Contact carrier material PPE
O-ring material Silopren LSR 2660
Housing material PPE

Cable length 130 mm
Cable structure
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter 56x0.3
Cable type S02
External cable diameter 4.6 mm ±0.15 mm
Outer sheath, material PE-X
External sheath, color blue
Single wire, cross section 4 mm²
Mechanical properties
Cable pull-out force > 80 N
Ambient conditions
Halogen-free yes

Degree of protection (when plugged in) IP66 / IP68 (2 m / 24 h)
Degree of protection (not plugged in) IP65
Ambient temperature (operation) -40 °C ... 85 °C
Ambient temperature (assembly) -25 °C ... 50 °C

Item number 1805151
Packing unit 50 pc
Minimum order quantity 50 pc
Sales Key ABL
Product Key ABLBAA
Catalog Page Page 420 (C-2-2013)
GTIN 4046356671774
Weight per Piece (including packing) 11.8 g
Weight per Piece (excluding packing) 11 g
Customs tariff number 85444290
Country of origin DE


ECLASS-9.0 27440107
ECLASS-10.0.1 27440107
ECLASS-11.0 27440107


ETIM 8.0 EC002635




Approval ID: B.01687

TÜV Rheinland

Approval ID: R 60126961
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
1500 V

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values