Network isolator - FL ISOLATOR 1000-RJ/RJ
2313915

Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 1 Gbps. Possible to connect two RJ45 plugs.


Product Details


The FL ISOLATOR is used for electrical isolation in copper-based Ethernet networks. In industrial environments, potential differences pose a constant problem with regard to interference-free data transmission. The high-quality isolation for up to 4 kV provides reliable protection for Ethernet devices and interfaces. This results in considerably higher immunity to interference in industrial applications.



Product type Network isolator
MTBF 5446 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
2959 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))

Electrical isolation Ethernet // Ethernet
Insulation voltage input/output 250 Vrms
Test voltage data interface/data interface 4 kV AC (50 Hz, 1 min.)

Supply
Torque 0.56 Nm ... 0.79 Nm

Signal Ethernet
PROFINET
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100/1000 Mbps
Connection method RJ45 jack, shielded
No. of channels 1
Transmission length ≤ 100 m (Total length across both ports (dependent on data rate and cable used))
Data: Ethernet interface, 10/100/1000Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100/1000 Mbps
Connection method RJ45 jack, shielded
No. of channels 1

Dimensional drawing
Width 22.5 mm
Height 99 mm
Depth 92 mm

Color green
Material PA 6.6-FR (Housing)

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 75 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
CE
Identification EAC
CE
Identification 508 Listed
CE
Identification ISA-S71.04-1985 G3 Harsh Group A
CE
Identification DNV GL
DNV GL data
Temperature B
Humidity A
Vibration A
EMC B
Enclosure Required protection according to the Rules shall be provided upon installation on board

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 26 MHz ... 3 GHz (Test Level 3)
Field intensity 20 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Emitted interference
Standards/regulations EN 61000-6-4
Radio interference voltage in acc. with EN 55011 Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 Class B, area of application: Industry and residential

Standards/regulations EN 50121 and EN 50155 (for railway applications)

Mounting type DIN rail mounting

Item number 2313915
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key DNC
Product Key DNC332
Catalog Page Page 364 (C-6-2019)
GTIN 4046356574563
Weight per Piece (including packing) 121.3 g
Weight per Piece (excluding packing) 119 g
Customs tariff number 85437090
Country of origin DE


ECLASS

ECLASS-9.0 27240692
ECLASS-10.0.1 27240692
ECLASS-11.0 27240692

ETIM

ETIM 8.0 EC002584

UNSPSC

UNSPSC 21.0 39121400

EAC

Approval ID: RU *-DE.A*30.B.01735

DNV GL

Approval ID: TAA00001KR
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

UL Listed

Approval ID: FILE E 238705

cUL Listed

Approval ID: FILE E 238705

cULus Listed


China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

No power supply required
Dielectric strength of up to 4 kV
Protection against aggressive environmental influences, particularly harsh industrial environments, thanks to coated PCB
Approval for railway applications (rolling stock) according to EN 50155 and EN 50121
Electrical isolation of data cables and cable shielding
Extended temperature range of -25°C to +85°C
Mounting on EN DIN rails
Transmission speed of up to 1000 Mbps
Continuous insulation voltage of 250 VRMS
Shipbuilding approval in accordance with DNV GL