INTERBUS ST bus terminal modules with additional interfaces (Bus)
In addition to configuring a modular input/output station with ST modules, the bus terminal modules with additional INTERBUS interfaces provide the option of connecting further INTERBUS network devices.
The IBS ST 24 BK LB-T module is equipped with an additional local bus interface with a 15-pos. D-SUB connector. The flat pack design input/output modules from PHOENIX CONTACT, for example, and frequency inverters with local bus interfaces can be connected to this interface.
An additional remote bus connection is provided by the IBS ST 24 RB-T. All devices with an INTERBUS remote bus interface can be connected in this remote bus branch.
The input/output bus terminal modules with additional fiber optic interfaces are available for integrating INTERBUS compatible devices into an INTERBUS fiber optic network.
All INTERBUS bus terminal modules make it possible to individually ebnable/disable the additional bus interfaces. To some extent, they perform the role of two bus terminal modules in the INTERBUS system and are also treated as such in the address lists and configuring software (CMD).
Note: When configuring buses branching off from the bus terminal modules, please observe the topology supported by INTERBUS controller boards.
IBS ST 24 BK RB-T
-
Bus coupler
2753504
INTERBUS-ST bus terminal module, 24 V DC, 9-pos., D-SUB with additional remote bus stub line, 9-pos. D-SUB, IP20 protection, consisting of: Terminal part with screw connection and module electronics
Product details
| Dimensional drawing |
|
| Width | 81 mm |
| Height | 117 mm |
| Depth | 116 mm |
| Color | green |
| INTERBUS | |
| Connection method | 9-pos. D-SUB plug/socket |
| Designation connection point | Incoming/Outgoing Remote Bus |
| Number of positions | 9 |
| ST local bus | |
| Transmission speed | 500 kbps |
| INTERBUS | |
| Connection method | 9-pos. D-SUB socket |
| Number of positions | 9 |
| Fieldbus: Local bus gateway | |
| Max. number of local bus devices | max. 8 |
| Digital: | |
| Connection technology | Screw connection |
| Product type | I/O component |
| Product family | Smart Terminal ST |
| Type | modular |
| INTERBUS Smart Terminal | |
| Mounting position | Horizontal DIN rail |
| Supply: Module electronics | |
| Supply voltage | 24 V DC |
| Supply voltage range | 20 V DC ... 30 V DC (including ripple) |
| Current consumption | typ. 150 mA (without ST module expansions) |
| typ. 650 mA (For maximum number of I/O modules on the ST local bus) | |
| Ripple | 3.6 Vpp within the allowable voltage range |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: Incoming remote bus / Outgoing remote bus | 500 V AC, 50 Hz, 1 min |
| Test voltage: Power supply voltage / ST local bus | 500 V AC, 50 Hz, 1 min |
| Test voltage: Incoming remote bus/ST interface | 500 V AC, 50 Hz, 1 min |
| Test voltage: Incoming remote bus/Remote bus branch | 500 V AC, 50 Hz, 1 min |
| Connection technology | |
| Connection name | Terminal block |
| Conductor connection | |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 8 mm |
| Terminal block | |
| Connection method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | 0 °C ... 55 °C |
| Degree of protection | IP20 |
| Air pressure (operation) | 86 kPa ... 108 kPa (up to 1500 m above sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Permissible humidity (operation) | 30 % ... 75 % (non-condensing) |
| Permissible humidity (storage/transport) | 30 % ... 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | DIN rail mounting |
| Mounting position | Horizontal DIN rail |
Your advantages
Additional I/Os onboard
Copper or fiber optic connection
Additional remote/local bus branches