MT 1,5-QUATTRO-PE - Protective conductor terminal block

3001695

Protective conductor terminal block, When aligning with a feed-through terminal block of the same shape, an end cover must be interposed for insulation voltages of > 320 V, number of connections: 4, connection method: Screw connection, cross section: 0.14 mm² - 1.5 mm², mounting type: NS 15, color: green-yellow

Product details

General	When aligning with a feed-through terminal block of the same shape, an end cover must be interposed for insulation voltages of > 320 V

Product type	Ground terminal block
Number of connections	4
Number of rows	2
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Rated surge voltage	4 kV
Maximum power dissipation for nominal condition	0.56 W

Number of connections per level	4
Nominal cross section	1.5 mm²
Level 1 above 1+2 below 1+2
Screw thread	M2
Note	Please observe the current carrying capacity of the DIN rails.
Tightening torque	0.22 ... 0.25 Nm
Stripping length	6 mm
Internal cylindrical gage	A1
Connection in acc. with standard	IEC 60947-7-2
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Cross section AWG	26 ... 16 (converted acc. to IEC)
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section, flexible [AWG]	26 ... 16 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)	0.25 mm² ... 0.75 mm²
Flexible conductor cross section (ferrule with plastic sleeve)	0.25 mm² ... 0.75 mm²

Width	4.2 mm
Height	33.5 mm
Depth on NS 15	30 mm

Color	green-yellow
Flammability rating according to UL 94	V0
Insulating material group	I
Insulating material	PA
Static insulating material application in cold	-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))	130 °C
Relative insulation material temperature index (Elec., UL 746 B)	130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26	HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)	28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)	passed
Specific optical density of smoke NFPA 130 (ASTM E 662)	passed
Smoke gas toxicity NFPA 130 (SMP 800C)	passed

Mechanical data
Open side panel	No

Ambient conditions
Ambient temperature (operation)	-60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport)	-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)	-5 °C ... 70 °C
Ambient temperature (actuation)	-5 °C ... 70 °C
Permissible humidity (operation)	20 % ... 90 %
Permissible humidity (storage/transport)	30 % ... 70 %

Connection in acc. with standard	IEC 60947-7-2

Mounting type	NS 15

Commercial data

Item number	3001695
Packing unit	50 pc
Minimum order quantity	50 pc
Sales key	BE1
Product key	BE1261
GTIN	4017918107208
Weight per piece (including packing)	4.89 g
Weight per piece (excluding packing)	4.89 g
Customs tariff number	85369010
Country of origin	TR

Classifications

Approvals

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
			28 - 14

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
Use group B
			30 - 14
Use group F
			30 - 14
Use group D
			30 - 14

Approval Specification Data
	Nominal voltage U_N	Nominal current I_N	Cross section AWG	Cross section mm²
				- 1.5

Environmental product compliance

Compatible products

Accessories

Your advantages

Corrosion-free terminal points

Low contact resistance

Captive terminal block screws

Green-yellow housing

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MT 1,5-QUATTRO-PE - Protective conductor terminal block

3001695

Product details

ECLASS

ETIM

UNSPSC

CSA

EAC

cULus Recognized

CCA

LR

BV

DNV

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MT 1,5-QUATTRO-PE - Protective conductor terminal block 3001695

Product details

ECLASS

ETIM

UNSPSC

Compatible products

NS 15 UNPERF 2000MM VPE 10 - DIN rail, unperforated 1401695

NS 15 PERF 2000MM VPE 10 - DIN rail perforated 1401682

NS 15 AL PERF 2000MM VPE 10 - DIN rail perforated 1401763

NS 15 WH PERF 2000MM-VPE 10 - DIN rail perforated 1204096

ZBF 4:UNBEDRUCKT - Zack Marker strip, flat 0808587

ZBF 4 CUS - Zack Marker strip, flat 0825023

ZBF 4,LGS:FORTL.ZAHLEN - Zack Marker strip, flat 0808626

ZBF 4,QR:FORTL.ZAHLEN - Zack Marker strip, flat 0808820

ZBF 4,LGS:GERADE ZAHLEN - Zack Marker strip, flat 0810818

ZBF 4,LGS:UNGERADE ZAHLEN - Zack Marker strip, flat 0810850

UC-TMF 4 - Marker for terminal blocks 0818166

UC-TMF 4 CUS - Marker for terminal blocks 0824630

UCT-TMF 4 - Marker for terminal blocks 0828742

UCT-TMF 4 CUS - Marker for terminal blocks 0829651

PAI-4 - Test adapter 3030925

CLIPFIX 15 - End bracket 3022263

SZS 0,4X2,5 VDE - Screwdriver 1205037

Your advantages

MT 1,5-QUATTRO-PE - Protective conductor terminal block

3001695