VARIOFACE front adapter for Siemens SIMATIC® ET200SP, with a 20-pos. FLK-/IDC male strip, max. 16 channels can be connected
Product details
Product type
Front adapter
Product family
VARIOFACE
Insulation characteristics: Air clearances and creepage distances
Insulation
Functional insulation
Overvoltage category
II
Pollution degree
2
Operating voltage (DC)
≤ 60 V DC
Nominal operating mode
100% operating factor
Current (per branch)
≤ 1 A
Current (Voltage supply via IDC/FLK)
≤ 2 A
Current (Voltage supply via Push-in connection)
≤ 8 A
Air clearances and creepage distances
Rated insulation voltage
63 V
Rated surge voltage
0.6 kV (1.2/50 μs)
Supported controller SIEMENS ET 200SP
Suitable base unit
6ES7193-6BP00-0BA0
6ES7193-6BP00-2BA0
6ES7193-6BP00-0BA1
6ES7193-6BP00-0DA0
6ES7193-6BP00-2DA0
6ES7193-6BP00-0DA1
Suitable I/O module
6ES7131-6BH01-0BA0 (Base Units A0/A1)
6ES7131-6BH01-2BA0 (Base Units A0/A1)
6ES7132-6BH01-0BA0 (Base Units A0/A1)
6ES7132-6BH01-2BA0 (Base Units A0/A1)
6ES7134-6GD01-0BA1 (Base Units A0/A1)
6ES7134-6GD01-2BA1 (Base Units A0/A1)
6ES7134-6HD01-0BA1 (Base Units A0/A1)
6ES7134-6HD01-2BA1 (Base Units A0/A1)
6ES7134-6TD00-0CA1 (Base Units A0/A1)
6ES7134-6JD00-0CA1 (Base Units A0/A1)
6ES7134-6JD00-2CA1 (Base Units A0/A1)
6ES7134-6FF00-0AA1 (Base Units A0/A1)
6ES7134-6GF00-0AA1 (Base Units A0/A1)
6ES7134-6JF00-0CA1 (Base Units A0/A1)
6ES7134-6JF00-2CA1 (Base Units A0/A1)
6ES7134-6FB00-0BA1 (Base Units A0/A1)
6ES7134-6GB00-0BA1 (Base Units A0/A1)
6ES7134-6HB00-0CA1 (Base Units A0/A1)
6ES7134-6HB00-0DA1 (Base Units A0/A1)
6ES7135-6FB00-0BA1 (Base Units A0/A1)
6ES7135-6GB00-0BA1 (Base Units A0/A1)
6ES7135-6HB00-0CA1 (Base Units A0/A1)
6ES7135-6HB00-0DA1 (Base Units A0/A1)
6ES7135-6HD00-0BA1 (Base Units A0/A1)
Connection 1 (control level)
Connection method
Plug-in connection
Number of connections
1
Number of positions
18
Connection 2 (field level)
Connection in acc. with standard
IEC 60603-13
Connection method
IDC/FLK pin strip
Number of connections
1
Number of positions
20
Insertion/withdrawal cycles
> 50
Pitch
2.54 mm
Connection 3 (supply)
Connection method
Push-in spring connection
Stripping length
9 mm
Number of connections
1
Number of positions
2
Conductor cross section rigid
0.14 mm² ... 1.5 mm²
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
0.25 mm² ... 1.5 mm² (Ferrule without plastic sleeve)
0.25 mm² ... 0.75 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG
26 ... 16
Pitch
3.81 mm
Item dimensions
Width
14.9 mm
Height
52.95 mm
Depth
48.99 mm
Ambient conditions
Degree of protection (Module)
IP00
Degree of protection (Installation location)
≥ IP54
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-20 °C ... 70 °C
Altitude
≤ 2000 m
UL, USA/Canada
Identification
UL 508 Recognized
Air clearances and creepage distances
Standards/regulations
EN IEC 60664-1
Mounting type
Plug-in mounting
Mounting position
any
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Assembly note
Once plugged in, the front adapter and terminal block form a single unit that can no longer be separated.
