Selective circuit breaker, can be plugged in TMCP socket, signaling by two-color LED, floating signal contact, on/off pushbutton, width: 12.5 mm, color: black
Product details
General
When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80 % due to the thermal effect during continuous operation (100 % operating factor). Parallel connection of multiple load outputs is not permitted.
Product type
Device circuit breakers
Product family
ECP
Type
Male
Number of positions
1
No. of channels
1
Insulation characteristics
Overvoltage category
II
Degree of pollution
2
Fuse type
Automatic device
Switch-on delay
300.00 ms
Short-circuit current
Active current limitation, max. 1.8 x IN
Service life electrical
10000 cycles in the case of 1 x IN
Maximum power dissipation for nominal condition
≤ 1.66 VA
Switching capacity ICN
Active current limitation
Fuse
electronic
General
Operating voltage
24 V DC
18 V DC ... 32 V DC
Nominal current IN
3 A (adjustable)
6 A (adjustable)
Rated surge voltage
0.5 kV
Required backup fuse
not required, integrated failsafe element
Dielectric strength
1000 V AC (Actuation area)
500 V AC (Installation area)
500 V AC (Load circuit signal contact)
Switch off
typ. 1.8 x IN
Active current limitation
active
Fuse
electronic
Closed circuit current I0
typ. 13 mA
Voltage drop
140 mV (or 280 mV)
Contact switching type
With electrical isolation
Load circuit
Shutdown time
typ. 5 s (for electrical insulation when ILoad > 1.1 x IN)
