Device circuit breakers - CB E1 24DC/6A NO P 2800905

Electronic device circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.

This product needs further products for operation.

Mandatory Accessories

Product Details

General When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor).
Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC).
Parallel connection of multiple circuit breakers is not permitted.
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

No. of channels 1
Operating voltage 24 V DC
Operating voltage 18 V DC ... 30 V DC
Nominal current IN 6 A
Rated surge voltage 0.5 kV
Tripping method E (electronic)
Required backup fuse not required, integrated failsafe element
Dielectric strength max. 30 V DC (Load circuit)
Active current limitation typ. 1.25 x IN
Fuse electronic
Closed circuit current I0 typ. 8 mA (When switched on)
Closed circuit current I0 typ. 17 mA (With alarm output)
Power dissipation 1.19 W (Nominal operation)
Temperature derating 5 A (at 50 °C)
Voltage drop 130 mV (at IN)
Auxiliary contact
Type of contact floating signal contact
Minimum operating voltage Umin DC 10 V DC
Maximum operating voltage Umax DC 30 V DC
Minimum operating current Imin 10 mA
Max. operating current Imax 0.5 A
Load circuit
Shutdown time 130 ms (see time/current characteristic curve)
Undervoltage switch-off < 14 V (typ. OFF)
Undervoltage switch-off > 17 V (typ. ON)
Max. capacitive load 20000 µF

Dimensional drawing
The figure shows the complete module consisting of a base element and connector
Width 12.3 mm
Height 45 mm
Depth 52 mm
Complete module width 12.3 mm
Complete module height 90 mm
Complete module depth 77.3 mm

Color gray
Flammability rating according to UL 94 V-0

Mounting type on base element

UL approval
Identification UL Listed UL 508
Identification UL Recognized UL 2367
Shipbuilding approval
Identification DNV GL

Degree of protection IP30 (Actuation area)
Ambient temperature (operation) -25 °C ... 50 °C (non-condensing)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Humidity test 96 h, 95 % RH, 40 °C
Vibration (operation) 3g (In accordance with IEC 60068-2-6, Test Fc)

Standards/specifications EN 61000-6-3
Standards/specifications EN 61000-6-2

Type Male
Number of positions 1
No. of channels 1
Insulation characteristics
Degree of pollution 2

Order Key 2800905
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key CLA
Catalog Page Page 382 (C-4-2019)
GTIN 4046356690751
Weight per Piece (including packing) 35.1 GRM
Weight per Piece (excluding packing) 21.4 GRM
Customs tariff number 85362010

UL Listed

UL Recognized

cUL Listed


cULus Listed

Your advantages

Supply/remote signaling can be bridged with CLIPLINE complete accessories
Compact design with precise nominal current levels
Modular expansion possible thanks to the uniform, plug-in housing concept
Sophisticated remote signaling concept enables monitoring from any location
N/O contact for remote signaling of the operating state
Active current limitation, even when switching capacitive loads