Y distributor, 5-position, shielded, Plug straight M12, coding: L, on Socket straight M12, coding: L and Socket straight M12, coding: L, for direct current up to 16 A/63 V, Parallel distributor
You can wire different cable lengths flexibly on site with our sensor/actuator connectors for assembly. The wide range of connection technologies enables fast and reliable connection. Customize your cabling according to your specific requirements using adapters and distributors. From snap-in and M8 to M12, we offer a wide range of wiring versions and designs.
Y distributor, 5-position, shielded, Plug straight M12, coding: L, on Socket straight M12, coding: L and Socket straight M12, coding: L, for direct current up to 16 A/63 V, Parallel distributor
H distributor, 5-position, shielded, Plug straight M12, coding: L, on Socket straight M12, coding: L and Socket straight M12, coding: L, for direct current up to 16 A/63 V, Parallel distributor
Y distributor, 5-position, shielded, Plug straight M12, coding: K, on Socket straight M12, coding: K and Socket straight M12, coding: K, for AC current up to 12 A/630 V, Parallel distributor
H distributor, 5-position, shielded, Plug straight M12, coding: K, on Socket straight M12, coding: K and Socket straight M12, coding: K, for AC current up to 12 A/630 V, Parallel distributor
Y distributor, 4-position, shielded, Plug straight M12, coding: T, on Socket straight M12, coding: T and Socket straight M12, coding: T, For direct current up to 12 A/63 V, Parallel distributor
H distributor, 4-position, shielded, Plug straight M12, coding: T, on Socket straight M12, coding: T and Socket straight M12, coding: T, For direct current up to 12 A/63 V, Parallel distributor
Y distributor, 4-position, shielded, Plug straight M12, coding: S, on Socket straight M12, coding: S and Socket straight M12, coding: S, for AC current up to 12 A/630 V, Parallel distributor
H distributor, 4-position, shielded, Plug straight M12, coding: S, on Socket straight M12, coding: S and Socket straight M12, coding: S, for AC current up to 12 A/630 V, Parallel distributor
Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Socket angled M12 Push-Pull, Coding: D, Crimp connection, knurl material: PA 6.6, external cable diameter 4.5 mm ... 7.5 mm, without crimp contacts
Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Socket straight M12 Push-Pull, Coding: D, Crimp connection, knurl material: PA 6.6, external cable diameter 4.5 mm ... 7.5 mm, without crimp contacts
Cabling sensors and actuators in an industrial environment requires the reliable and fast connection of electric cables. With our connectors for assembly, we provide all the appropriate connection technologies for your application in an M12 design.
Sensor/actuator connectors with Push-in connection
The M12 sensor/actuator connectors with Push-in connection allow easy and reliable signal and data cabling. The leg springs of the Push-in connection provide long-term stability due to a defined contact force. Wire rigid and pretreated conductors easily and without tools by means of direct insertion. To connect fine-stranded litz wires and release a connected conductor, simply open the terminal point using the colored lever. The contact holder is identified by its color and number. This simplifies assigning conductors with standard colors.
Sensor/actuator connectors with QUICKON connection
QUICKON provides the fastest connection for M12 connectors for assembly. It is equipped with an IDC insulation displacement contact. With this connection method, an unprepared wire with insulation is positioned in front of the gap of the insulation displacement contact and then pushed into the blade gap by means of insulation displacement. This cuts through the wire insulation and a gas-tight, vibration-resistant contact is made between the wire and the contact.
Sensor/actuator connectors with crimp connection
The crimp connection requires little space and is cost-effective in series production. Crimp connection technology allows fast, automated connection wherever cables have to be assembled in large volumes. The extremely compact connector for assembly is suitable for railway applications.
Sensor/actuator connectors with pierce connection
Connectors for assembly with pierce connection have an impressive compact yet high-position design. The contact is made via a contact pin, which pierces the single wires axially.
Sensor/actuator connectors with screw connection
The screw connection is one of the classic connection technology solutions. An important characteristic is the maintenance-free conductor contact. It is not necessary to retighten the connection screw. All types of copper conductors can be clamped without any pretreatment, thereby making gas-tight and permanent contact.
Distributors and adapters
Maximum range of options for distributing signals or adapting different interfaces.