PCB terminal block, nominal current: 41 A, rated voltage (III/2): 1000 V, nominal cross section: 6 mm2, Number of potentials: 4, Number of rows: 1, Number of positions per row: 4, product range: SPT 5/..-H, pitch: 7.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Zigzag pinning W, Solder pin [P]: 4.6 mm, type of packaging: packed in cardboard
| Electrical properties | |
| Rated surge voltage (III/2) | 8 kV |
| Pollution degree | 2 |
| Rated voltage (III/2) | 1000 V |
| Air clearances and creepage distances | | |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum creepage distance (III/3) | 10 mm |
| minimum clearance value - non-homogenous field (III/3) | 8 mm |
| Insulating material group | I |
| minimum clearance value - non-homogenous field (III/2) | 8 mm |
| minimum creepage distance (III/2) | 8 mm |
| Comparative tracking index (IEC 60112:2003-01) | CTI 600 |
| minimum creepage distance (II/2) | 5.5 mm |
| Rated surge voltage (II/2) | 6 kV |
| Rated insulation voltage (III/3) | 800 V |
| Rated insulation voltage (III/2) | 1000 V |
| Specification | IEC 60664-1:1992-10 + A1:2000-02 + A2:2002-05 |
| Rated insulation voltage (II/2) | 1000 V |
| Rated surge voltage (III/3) | 8 kV |
| Rated surge voltage (III/2) | 8 kV |
| Temperature-rise test | |
| Specification | IEC 60998-2-1:2002-12 |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| Rated surge voltage (III/3) | 8 kV |
| Rated surge voltage (III/2) | 8 kV |
| Rated voltage (II/2) | 1000 V |
| Nominal current IN | 41 A |
| 41 A | |
| Rated surge voltage (II/2) | 6 kV |
| Nominal voltage UN | 800 V |
| Rated voltage (III/2) | 1000 V |
| Type of packaging | packed in cardboard |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Glow-wire test | |
| Temperature | 850 °C |
| Time of exposure | 5 s |
| Specification | IEC 60998-1:2002-12 |
| Vibration test | |
| Amplitude | 0.35 mm (10 - 60.1 Hz) |
| Test duration per axis | 2.5 h |
| Frequency | 10 - 150 - 10 Hz |
| Specification | IEC 60068-2-6:1995-03 |
| Sweep speed | 1 octave/min |
| 5 g (60.1 - 150 Hz) | |
| Dimensional drawing |
|
| Hole diameter | 2.1 mm |
| Installed height | 19.6 mm |
| Pin dimensions | 1.7 x 0.8 mm |
| Length | 24.15 mm |
| Length of the solder pin | 4.6 mm |
| 4.6 mm | |
| Pitch | 7.5 mm |
| Height | 24.2 mm |
| Width | 31.8 mm |
| PCB design | |
| Pin spacing | 13.2 mm |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Test for conductor damage and slackening | |
| Specification | IEC 60998-2-2:2002-12 |
| Result | Test passed |
| Pull-out test | |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm2 / solid / > 10 N |
| 0.2 mm2 / flexible / > 10 N | |
| 10 mm2 / solid / > 90 N | |
| 6 mm2 / flexible / > 80 N | |
| Specification | IEC 60998-2-2:2002-12 |
| Flexion test | |
| Specification | IEC 60998-2-2:2002-12 |
| Result | Test passed |
| Connection test | |
| Specification | IEC 60998-2-2:2002-12 |
| Result | Test passed |
| Environmental Product Compliance | |
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
| No hazardous substances above threshold values | |
| Connection technology | |
| Nominal cross section | 6 mm2 |
| Conductor connection | |
| Conductor cross section AWG | 24 ... 8 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm2 ... 6 mm2 |
| Conductor cross section solid | 0.2 mm2 ... 10 mm2 |
| Stripping length | 15 mm |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.25 mm2 ... 1.5 mm2 |
| Connection method | Push-in spring connection |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm2 ... 6 mm2 |
| Conductor cross section flexible | 0.2 mm2 ... 6 mm2 |
| Material data - housing | |
| Insulating material group | I |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| CTI according to IEC 60112 | 600 |
| Housing color | green (6021) |
| Insulating material | PA |
| Flammability rating according to UL 94 | V0 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Material data - contact | |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| Contact material | Cu alloy |
| Surface characteristics | Tin-plated |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Metal surface soldering area (top layer) | Tin (4 - 8 µm Sn) |
| Number of positions | 4 |
| Number of potentials | 4 |
| Number of levels | 1 |
| Number of connections | 4 |
| Pin layout | Zigzag pinning W |
| Nominal voltage UN | 1000 V |
|---|---|
| Nominal current IN | 41 A |
| AWG/kcmil | 0.2-6 |
| Min. cross section | 0.2 mm² |
| Max. cross section | 6 mm² |
| Nominal voltage UN | 1000 V |
|---|---|
| Nominal current IN | 41 A |
| AWG/kcmil | 0.2-6 |
| Min. cross section | 0.2 mm² |
| Max. cross section | 6 mm² |
| Usegroup | B | C |
|---|---|---|
| Nominal voltage UN | 600 V | 600 V |
| Nominal current IN | 36 A | 36 A |
| AWG/kcmil | 0.2-6 | 0.2-6 |
| Min. cross section | 24 mm² | 24 mm² |
| Max. cross section | 8 mm² | 8 mm² |