Control box - SCX 2POE 2T 1108544

Smart Camera Box to connect PoE end devices, two PoE ports, two uplink ports (RJ45), integrated Managed Switch and surge protection, supply voltage 100 ... 240 V AC, wall or mast mounting


Product Details


The Smart Camera Box is used to connect PoE end devices such as IP cameras to a video server. You can use the Smart Camera Box to supply voltage to PoE end devices and additional external devices.The Smart Camera Box integrates the functions of conventional connection boxes equipped with standard DIN rail devices into a single compact device. This saves you planning and installation time.Numerous management and monitoring functions ensure reliable operation of the system.



Cable structure
External cable diameter 6 mm ... 12 mm (M20)
6 mm ... 10 mm (M25)
Ambient conditions
Other resistance UV-resistant in accordance with UL746C Housing

Ambient conditions
Impact strength IK10
Ambient temperature (operation) -40 °C ... 70 °C (>50°C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection IP65
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Altitude 2000 m

Environmental Product Compliance
REACh SVHC Lead 7439-92-1

Rated insulation voltage 3 kV AC (Input / output, IEC/EN 60950-1)
Supply
Supply voltage range 100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
Connection method Push-in spring connection

Dimensional drawing
Height 364 mm
Width 284 mm
Depth 121 mm

Impact strength IK10
Material Polycarbonate PC (Housing)
Flammability rating according to UL 94 V0 (Housing)
V2 (Cable gland)
V2 (Cable gland)

Basic functions Store-and-forward switch, complies with IEEE 802.3
Data: Configuration interface
No. of channels 1
Connection method RJ45
Data: Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission length 100 m (per segment)
100 m (per segment)
Maximum output power 165 W (>55°C derating)
155 W (If switching output is active, >55°C derating)
90 W (per port POE1/2, >50°C derating)
Transmission medium Copper
Copper
No. of channels 2
2
Connection method RJ45 jack
RJ45 jack
Transmission speed 10/100/1000 Mbps
10/100/1000 Mbps
Data: Switching output
Conductor cross section AWG min. 24
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm2 ... 1.5 mm2 (Stripping length 8 mm)
No. of channels 1
Load/output load current output no inductive load
Stripping length 10 mm
Connection method Push-in spring connection
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm2 ... 0.75 mm2 (Stripping length 8 mm)
Conductor cross section flexible min. 0.2 mm2
Conductor cross section solid min. 0.2 mm2
Output nominal voltage 24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Conductor cross section AWG max. 16
Conductor cross section solid max. 1.5 mm2
Conductor cross section flexible max. 1.5 mm2
Output current 300 mA (typical)

Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A
CE
Identification CE-compliant
UL, USA/Canada
Identification Listed
UL 61010-1, 3rd Edition
UL 61010-2-201, 2nd Edition
CAN/CSA C22.2 No. 61010-1-12
CSA C22.2 No. 61010-2-201:18

Noise emission EN 61000-6-4, Class B, domain of use: residential and small commercial
Noise immunity EN 61000-6-2
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Conducted noise emission EN 61000-6-3 Class B, domain of use: residential and small commercial
Surge current load (surge)
Input ± 1 kV (AC supply, line to line)
± 2 kV (AC supply, line to ground)
Standards/regulations EN 61000-4-5
Fast transients (burst)
Signal ± 2.2 kV (1 minute)
Input ± 2.2 kV (1 minute)
Comments Criterion B
Standards/regulations EN 61000-4-4
Conducted interference
Frequency range 0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Comments Criterion A
Voltage 10 V
Standards/regulations EN 61000-4-6
Electromagnetic HF field
Frequency range 80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz)
Comments Criterion A
Standards/regulations EN 61000-4-3
Field intensity 10 V/m
Electrostatic discharge
Indirect discharge ± 6 kV
Comments Criterion B
Standards/regulations EN 61000-4-2
Discharge in air ± 8 kV
Contact discharge ± 6 kV
Emitted interference
Comments Class B, domain of use: residential and small commercial
Standards/regulations EN 61000-6-4

Functionality
Basic functions Store-and-forward switch, complies with IEEE 802.3

Supply
Conductor cross section, flexible [AWG] 24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve 0.2 mm2 ... 4 mm2
Stripping length 10 mm
Conductor cross section, flexible 0.20 mm2 ... 6.00 mm2
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm2 ... 1.5 mm2
Connection method Push-in spring connection
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.2 mm2 ... 4 mm2
Conductor cross section, rigid 1.00 mm2 ... 6.00 mm2

Standard designation Strain relief
Standards/regulations IEC 62444
Other resistance UV-resistant in accordance with UL746C Housing

Platform

MTTF 496 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
247 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
105 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Protection class I (Protective grounding of all conductive housing parts)
Pollution degree 2
Overvoltage category III (With protective modules plugged in)
II (Without protective modules)


Order Key 1108544
Packing unit 1 pc
Minimum order quantity 1 pc
GTIN 4063151015121
Weight per Piece (including packing) 5,005.0 GRM
Weight per Piece (excluding packing) 4,300.0 GRM
Customs tariff number 85176200
Country of origin DE



cULus Listed


Your advantages

Cost savings with an all-in-one solution that provides all functions in a single device
Significant time savings with adapter for wall and mast mounting
Replaceable surge protection
A wide range of alarm messages via SNMP, such as in the event of sabotage attempts or defective surge protection
Advanced PoE management for reliable operation of IP cameras
Quick and easy startup and configuration via web-based management or the FL Network Manager software