Connectivity in residential buildings
COMPLETE line offers different solutions for efficient connections in building installations, from feed-in, potential distribution, and outgoing wiring, right through to the wet room and outdoor wiring. All products are easy to install, have standardized accessories, and have a consistent design.
At the feed-in point, the entire load of the building runs through just a few terminals. This places special demands on thermal management. At the same time, depending on the installation situation, there is only limited space for the feed-in. The solutions used must therefore be individually adaptable to the available space. The modular UDB ... trunk line branch terminals can be adapted both to the available installation space and to different supply system configurations.
Efficient use of space also plays an important role in potential distribution. Space problems often arise, in particular during conversions and retrofits. Here, PTFIX distribution blocks provide a flexible and scalable solution with different numbers of positions and mounting types. With the lateral conductor connection, the new PTVFIX blocks also enable particularly space-saving wiring.
The KNX outgoing wiring in the main distribution is a prerequisite for building automation. KNX installation terminal blocks from the COMPLETE line portfolio enable the numerous outlets of the main distribution to be arranged and labeled clearly – naturally in accordance with EIB, the “European Installation Bus” standard. The PTFIX portfolio features pre-assembled KNX blocks in various configurations.
Beyond the control box, the installation requires a higher degree of protection, even as high IP68, depending on the installation location. The corresponding wiring of conventional junction boxes is time-consuming and cost-intensive. IP68 installation systems are an alternative due to their fast, simple, and cost-effective assembly. The plug-in systems enable loads to be replaced with minimal downtimes in the event of maintenance or repair work. Here, COMPLETE line features the PRC series with proven screw connection up to 6 mm², the QPD system with fast insulation displacement connection, and the IPD series with convenient spring connection, among others.
In the field of PV connections, there are special requirements on the DC cable. SUNCLIX connectors fit to many photovoltaic systems on the DC side and to the string combiner box. They support the fast and error-free connection of the photovoltaic system.