HC-M-DSUB 09/O2T-MOD-BU
-
Contact insert module
1636444
HEAVYCON contact insert module, female, D-SUB 09, 2-pos., for RS-485-based bus systems with T functionality, with screw connection, pin 3 and 8 mounted, for HEAVYCON Modular
Product details
| General | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required. PROFIBUS T function: pin 8: signal A; pin 3: signal B. For turned crimp contacts according to DIN 41652. |
| Assembly note | Connectors may only be operated when there is no load/the power is switched off. Use of HC-CST... coding pins (1676857) and HC-CBU... coding sockets (1676860) has been prescribed. |
| Product type | Modular contact insert |
| Series | HC-M-DSUB |
| Application | Data |
| Number of positions | 2 |
| Connection profile | 2 |
| Contact numbering | A, B |
| Number of module slots | 1 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection technology | Screw connection |
| Conductor connection | |
| Conductor cross section | 0.09 mm² ... 0.5 mm² |
| Connection cross section AWG | 28 ... 20 |
| Tightening torque | 0.15 Nm |
| Stripping length of the individual wire | 3.8 mm |
| Dimensional drawing |
|
| Width | 34.2 mm |
| Height | 35.2 mm |
| Length | 14.6 mm |
| Mechanical characteristics | |
| Minimum housing height | 72 mm |
| Rated voltage (III/3) | 50 V |
| Rated surge voltage | 0.8 kV |
| Rated current | 5 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 500 |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PC |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 125 °C |