PLOTMARK
- Marking plotter
PLOTMARK
- Marking plotter
0804499
Marking plotter for the entire portfolio of UC marking materials and materials in sheet and strip format.
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
More information
CMS-INK-TR-C5
- Ink cartridge
CMS-INK-TR-C5
- Ink cartridge
5146684
Ink cartridge, special black ink, 5 cartridges of 1 ml each, for high demands
CLEANING STICK
- Cleaning pen
CLEANING STICK
- Cleaning pen
5146697
Cleaning stick for fast and efficient printhead cleaning of all Phoenix Contact thermal transfer printers.
P1 GRAVER 1.0
- Engraving tool
P1 GRAVER 1.0
- Engraving tool
5145520
Engraving tool, with a point angle of 15°, point diameter: 1.0 mm
CMS-PEN 0,35
- Marker pen
CMS-PEN 0,35
- Marker pen
5067828
Marker pen, incl. adapter, ink tank and reservoir, 0.35 mm nib
CMS-P1-M/GPE ENGRAVING
- Magazine
CMS-P1-M/GPE ENGRAVING
- Magazine
5145711
Magazine for CMS-P1-PLOTTER, to accommodate GPE materials, especially for the purpose of engraving
P1 GRAVER 0.5
- Engraving tool
P1 GRAVER 0.5
- Engraving tool
5145504
Engraving tool, with a point angle of 15°, point diameter: 0.5 mm
P1 ENGRAVING VC BAG
- Accessories
P1 ENGRAVING VC BAG
- Accessories
5145559
Accessories for plotters with engraving unit
P1 GRAVER 0.3
- Engraving tool
P1 GRAVER 0.3
- Engraving tool
5145481
Engraving tool, with a point angle of 15°, point diameter: 0.3 mm
P1 UC-MAG 6
- Magazine
P1 UC-MAG 6
- Magazine
5146121
Magazine, for CMS-P1-PLOTTER and PLOTMARK, for accommodating UC-EMP..., UC-EMLP...
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.
