The maximum load current of a single clamping unit must not be exceeded.
For power distribution applications, IEC 60364-4-43.2008; modified + corrigendum Okt. 2008 (DIN VDE 0100-430:2010-10) section 433.2 ff must be observed!
Product type
Distributor terminal block
Number of connections
13
Number of rows
1
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Service Entrance
yes
Number of connections per level
13
Nominal cross section
1.5 mm²
Rated cross section AWG
14
Load contact
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross-section rigid
0.14 mm² ... 2.5 mm²
Cross section AWG
26 ... 14 (converted acc. to IEC)
Conductor cross-section flexible
0.14 mm² ... 1.5 mm²
Conductor cross-section, flexible [AWG]
26 ... 14 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 1.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 1.5 mm²
Nominal current
17.5 A
Maximum load current
22 A (with a 2.5 mm² conductor cross-section)
Maximum total current
32 A
Nominal voltage
450 V
Line contact
Connection method
Push-in connection
Stripping length
10 mm ... 12 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross-section rigid
0.2 mm² ... 6 mm²
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
0.2 mm² ... 4 mm²
Conductor cross-section, flexible [AWG]
24 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.2 mm² ... 4 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
