H1X:D1MF
-
Housing
1415765
HEAVYPORT B6 panel mounting base, with single locking latch, with plastic protective cover, with stainless steel front plate connections, 1x D-SUB 9 (male/female)
Product details
| Product type | Stackable housing set |
| Housing type | Panel mounting base |
| Application | Standard |
| Type | B6 |
| Protective cover | yes |
| Tightening torque | 1.5 ... 2 Nm |
| Dimensional drawing |
|
| Width | 53 mm |
| Height | 30.5 mm |
| Length | 80.5 mm |
| Drill hole distance, horizontal | 70 mm |
| Drill hole distance, vertical | 32 mm |
| Hole diameter | 4.5 mm |
| Installation dimensions | |
| Width of the assembly cutout | 35 mm |
| Length of the assembly cutout | 52 mm |
| Material | Stainless steele (Front plate) |
| Seal material | NBR, conductive |
| NBR, conductive | |
| Housing material | Die-cast aluminum, salt water resistant |
| Housing surface material | uncoated |
| Material, protective cover | PA |
| Locking latch material | Polyamide |
| Contact insert design | with 1x D-SUB 9 pin/Terminal block slot locking #4-40 UNC bolts |
| Ambient conditions | |
| Degree of protection | IP66 |
| IP67 | |
| Impact strength | IK08 |
| Ambient temperature (operation) | -40 °C ... 125 °C (Housing) |
Your advantages
Good shielding in the event of electromagnetic interference