PLC-INTERFACE, hybrid solid-state relay incl. bypass relay with screw connection, for mounting on NS 35/7,5 DIN rail, input: 24 V DC, output: 12 V DC ... 250 V DC/10 A
Product details
Product type
Solid-state relay module
Product family
PLC-INTERFACE
Application
Output function
Operating mode
100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation
safe isolation
Overvoltage category
III
Pollution degree
2
Data management status
Date of last data management
08.07.2024
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Air clearances and creepage distances between the power circuits
Rated insulation voltage
260 V AC
Rated surge voltage
6 kV
Rated control circuit supply voltage US
24 V DC
Voltage range with reference to US
0.8 ... 1.2
Rated control supply current IS
≤ 19 mA
Rated actuating voltage UC
24 V DC
Voltage range with reference to UC
0.8 ... 1.2
Rated actuating current IC
6.8 mA
Nominal voltage (plugged-in solid-state relay)
24 V DC
"0" signal switching threshold in reference to UC
< 0.4
"1" signal switching threshold in reference to UC
> 0.8
Typical response time
20 ms
Typical turn-off time
40 ms
Status display
LED (yellow)
Protective circuit
Reverse polarity protection
Surge protection
Surge voltage protection
> 33 V DC
Transmission frequency
1 Hz
Designation
DC hybrid output
Contact switching type
1 N/O contact
Design of digital output
electronic
Output voltage range
12 V DC ... 250 V DC
Limiting continuous current
10 A (see derating curve)
Maximum inrush current
60 A (5 ms; Tamb = 60°C)
Min. load current
100 mA
Surge voltage protection
> 275 V
Output circuit
2-conductor / N/O contact in parallel operation (no electrical disconnection)
Protective circuit
Inverse diode (No continuous protection against polarity reversal)
Varistor
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Width
14 mm
Height
80 mm
Depth
94 mm
Color
gray (RAL 7042)
Ambient conditions
Degree of protection (Relay base)
IP20 (Relay base)
Degree of protection (Relay)
RT II (Relay)
Degree of protection (Installation location)
IP54 (Installation location)
Ambient temperature (operation)
-25 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Air clearances and creepage distances between the power circuits
Standards/regulations
IEC 60947-5-1
Mounting type
DIN rail mounting
Assembly note
See derating curve
Mounting position
any
Item number
2905495
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
C461
Product key
DK6235
GTIN
4046356957120
Weight per piece (including packing)
82 g
Weight per piece (excluding packing)
89.2 g
Customs tariff number
85364190
Country of origin
DE
ECLASS
ECLASS-11.0
27371604
ECLASS-12.0
27371604
ECLASS-13.0
27371604
ETIM
ETIM 9.0
EC001504
UNSPSC
UNSPSC 21.0
39122300
cULus Listed
Approval ID: E140324
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
