1. Home
  2. Products
  3. Motor starters and electronic switching devices
  4. Motor starters for DC motors
  5. Reversing load relay - ELR W1/ 6-24DC/RDT
Example application

Reversing load relay - ELR W1/ 6-24DC/RDT
2982757

Electronic reversing load relay, for controlling DC motors, with LED display and protective circuit, output: 10 - 30 V DC/6 A with a switch-over time of 1 ms

Product Details

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Product type Solid-state contactor
Operating mode 100% operating factor
Insulation characteristics
Overvoltage category III
Pollution degree 2
Insulation Basic insulation
Number of phases 1
Test voltage Input/output 2.5 kVrms (50 Hz, 1 min., input/output)
Supply
Input name Device supply
Nominal supply voltage 24 V DC ±20 %
Input voltage range 19.2 V DC ... 28.8 V DC
Rated control circuit supply voltage US 24 V DC
Control supply voltage range 10 V DC ... 30 V DC
Rated control supply current IS 7 mA
Protective circuit Surge protection
Operating voltage display Green LED
Control
Input name Control input right/left
Nominal input voltage UN 24 V DC
Input voltage range in reference to UN 0.8 ... 1.2
Input voltage range 19.2 V DC ... 28.8 V DC
Input voltage range in reference to UN 0.8 ... 1.2
Typical input current at UN 3 mA
Current consumption 3 mA
Rated actuating voltage UC 24 V DC
Triggering voltage range 19.2 V DC ... 28.8 V DC
Rated actuating current IC 3 mA
Typical response time 200 µs
Protective circuit Reverse polarity protection
Surge protection
Status display LED yellow, forward running (R), LED yellow, reverse running (L)
Surge voltage protection > 33 V DC
Switchover time RL/LL (turn-on time) 1 ms
DC output
Rated operating voltage Ue 24 V DC
Operating voltage range 10 V DC ... 30 V DC
Load current 6 A (see to derating)
Quiescent current approx. 7 mA (When switched off)
Protective circuit Reverse polarity protection
Surge protection
Surge voltage protection > 33 V DC
Operating voltage display Green LED
Current limitation at short-circuits 20 A
Control circuits
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Torque 0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Control circuits
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 14
Torque 0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Width 12.5 mm
Height 99 mm
Depth 114.5 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 80 °C
UKCA
Certificate UKCA-compliant
UKCA
Certificate NLDX.E228652
Air clearances and creepage distances between the power circuits
Standards/regulations EN 50178
Mounting type DIN rail mounting
Assembly instructions alignable, for spacing see derating
Mounting position vertical (horizontal DIN rail, motor output below)
Item number 2982757
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK7622
GTIN 4046356327251
Weight per Piece (including packing) 116.2 g
Weight per Piece (excluding packing) 112.2 g
Customs tariff number 85371098
Country of origin DE

ECLASS

ECLASS-9.0 27371014
ECLASS-10.0.1 27371014
ECLASS-11.0 27371014

ETIM

ETIM 8.0 EC002055

UNSPSC

UNSPSC 21.0 39122300

EAC

Approval ID: TR_TS_D_00573_c

UL Listed

Approval ID: FILE E 228652

cUL Listed

Approval ID: FILE E 228652

cULus Listed

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”