The TC ROUTER 3002T-4G GL cellular router is the successor to TC ROUTER 3002T-4G, item no. 2702528. The TC ROUTER for cellular communication implements high-performance data links of up to 150 Mbps via mobile 4G LTE networks. This enables you to establish a mobile broadband connection for highly flexible site networking even in places where a wired Internet connection is not available. These connections can be used to transmit sensitive data securely over mobile networks. Furthermore, the TC ROUTER offers a high level of security thanks to IPsec or OpenVPN tunnels, as well as an integrated stateful packet inspection firewall. This means that you can reliably protect your application against unauthorized access.
TC ROUTER 3002T-4G GL
-
Router
1632697
Industrial 4G LTE router, worldwide use, fallback to 3G (HSPA+) and 2G (EDGE), 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and email transmission, 2 digital inputs, 1 digital output
Free download available.
Downloads
Product details
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Cellular router |
| Application | Ethernet |
| MTTF | 379 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 182 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| 77 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) | |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Electrical isolation | VCC // LTE // Ethernet // PE |
| Maximum power dissipation for nominal condition | 4.8 W |
| Mains type | Cellular communication |
| Supply | |
| Supply voltage range | 10 V DC ... 30 V DC (Via pluggable Push-in terminal block) |
| Typical current consumption | < 200 mA (24 V DC) |
| 65 mA (With activated energy-saving mode) | |
| Max. current consumption | 1.7 A |
| Function | |
| Management | Web-based management |
| SNMPv1/v2/v3 | |
| SSHv2 | |
| Digital | |
| Description of the input | Digital input |
| Number of inputs | 2 |
| Voltage input signal | 10 V DC ... 30 V DC |
| Switching level "1" signal | 10 V DC ... 30 V DC |
| Signal | |
| Output name | Digital output |
| Number of outputs | 1 |
| Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
| Current output signal | ≤ 50 mA (Not short-circuit proof) |
| Supply | |
| Connection method | Push-in spring connection |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
| Single conductor/terminal point, rigid | 0.14 mm² ... 1.5 mm² |
| Single-wire/terminal point, flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section, flexible [AWG] | 26 ... 16 |
| Stripping length | 9.00 mm |
| Web server | yes |
| Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 | |
| Serial transmission speed | 10/100 Mbps, auto negotiation |
| Connection method | RJ45 jack, shielded |
| No. of channels | 2 |
| Transmission length | 100 m (shielded twisted pair) |
| Protocols supported | TCP/IP, UDP/IP, HTTP(S), (S)FTP |
| VPN: IPsec, OpenVPN | |
| Auxiliary protocols | ARP, DHCP, DNS, DynDNS, PING (ICMP), SMTP(S), NTP, SSL/TLS, STARTTLS, SMS |
| Wireless | |
| Interface description | 4G (LTE) / 3G (HSPA+) / 2G (EDGE) |
| Frequency range | 2100 MHz (LTE (FDD), B1) |
| 1900 MHz (LTE (FDD), B2) | |
| 1800 MHz (LTE (FDD), B3) | |
| 1700 MHz (LTE (FDD), B4) | |
| 2100 MHz (LTE (FDD), B4) | |
| 850 MHz (LTE (FDD), B5) | |
| 2600 MHz (LTE (FDD), B7) | |
| 900 MHz (LTE (FDD), B8) | |
| 700 MHz (LTE (FDD), B12) | |
| 700 MHz (LTE (FDD), B13) | |
| 800 MHz (LTE (FDD), B18) | |
| 800 MHz (LTE (FDD), B19) | |
| 800 MHz (LTE (FDD), B20) | |
| 1900 MHz (LTE (FDD), B25) | |
| 850 MHz (LTE (FDD), B26) | |
| 700 MHz (LTE (FDD), B28) | |
| 1700 MHz (LTE (FDD), B66) | |
| 2100 MHz (LTE (FDD), B66) | |
| 2000 MHz (LTE (TDD), B34) | |
| 2600 MHz (LTE (TDD), B38) | |
| 1900 MHz (LTE (TDD), B39) | |
| 2300 MHz (LTE (TDD), B40) | |
| 2500 MHz (LTE (TDD), B41) | |
| 2100 MHz (WCDMA, B1) | |
| 1900 MHz (WCDMA, B2) | |
| 1700 MHz (WCDMA, B4) | |
| 2100 MHz (WCDMA, B4) | |
| 850 MHz (WCDMA, B5) | |
| 850 MHz (WCDMA, B6) | |
| 900 MHz (WCDMA, B8) | |
| 800 MHz (WCDMA, B19) | |
| 1900 MHz (TD-SCDMA-GSM/EDGE, PCS) | |
| 1800 MHz (TD-SCDMA-GSM/EDGE, DCS) | |
| 900 MHz (TD-SCDMA-GSM/EDGE, E-GSM) | |
| 850 MHz (TD-SCDMA-GSM/EDGE, GSM) | |
| Data rate | ≤ 150 Mbps (LTE, DL) |
| ≤ 50 Mbps (LTE, UL) | |
| Number | 2 |
| Connection method | SMA (female) |
| Impedance | 50 Ω |
| SIM Interface | 1.8 V, 3 V, mini SIM (2FF) |
| LTE | CAT4 |
| Country support | Global |
| Dimensional drawing |
|
| Width | 45 mm |
| Height | 130 mm |
| Depth | 127 mm |
| Color (Upper housing part) | light gray (RAL 7035) |
| Material (Housing) | Polycarbonate |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | : 5g, 10...150 Hz, 2.5 h, in XYZ direction |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | : 15g |
| Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -40 °C ... 70 °C (Maximum transmission power 5 dBm) |
| -40 °C ... 60 °C (Maximum transmission power 23 dBm) | |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| CE | |
| Certificate | CE-compliant |
| Wireless approval, Europe | |
| Note | RED 2014/53/EU |
| UL, USA | |
| Identification | Class I, Zone 2, AEx ec IIC T4 Gc |
| Class I, Div. 2, Groups A, B, C, D T4 | |
| UL, Canada | |
| Identification | Ex ec IIC T4 Gc X |
| Corrosive gas test | |
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
| Wireless approval USA, FCC | |
| Certificate | XMR202212EG25GL |
| Wireless approval Canada, IC | |
| Certificate | 10224A-2022EG25GL |
| Electromagnetic compatibility | Conformance with RED Directive 2014/53/EU |
| Noise immunity | EN 61000-6-2 |
| Electrostatic discharge | |
| Standards/regulations | EN 61000-4-2 |
| Electrostatic discharge | |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Comments | Criterion B |
| Electromagnetic HF field | |
| Standards/regulations | EN 61000-4-3 |
| Electromagnetic HF field | |
| Frequency range | 80 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
| Fast transients (burst) | |
| Standards/regulations | EN 61000-4-4 |
| Fast transients (burst) | |
| Input | ± 2 kV (Test Level 3) |
| Signal | ± 2 kV (Ethernet) |
| Comments | Criterion B |
| Surge current load (surge) | |
| Standards/regulations | EN 61000-4-5 |
| Surge current load (surge) | |
| Input | ± 0.5 kV (symmetrical) |
| ± 1 kV (asymmetrical) | |
| Signal | ± 1 kV (Data line, asymmetrical) |
| Comments | Criterion B |
| Conducted interference | |
| Standards/regulations | EN 61000-4-6 |
| Conducted interference | |
| Frequency range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
| Emitted interference | |
| Standards/regulations | EN 61000-6-4 |
| Radio interference voltage in acc. with EN 55011 | Class B, area of application: Industry and residential |
| Emitted radio interference in acc. with EN 55011 | Class B, area of application: Industry and residential |
| Criteria | |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Mounting type | DIN rail mounting |
| Assembly note | Indoor installation |
| Mounting position | Vertical (horizontal DIN rail) |
Your advantages
Industrial cellular router for 4G cellular networks
Stateful packet inspection firewall for dynamic filtering
IPsec and OpenVPN
Alert sent via SMS or email directly via the integrated switching input
VPN remote start via call or SMS
Configuration via web-based management or microSD card
Two switching inputs and one switching output
Two local Ethernet connections
Extended temperature range of -40 °C … +70 °C
Comprehensive diagnostic functions
Switchable energy-saving mode
Integrated logbook
Connection monitoring