RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay module

1148699

Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 N/O contacts and 2 N/C contacts, input voltage: 24 V DC

Product details

Set consists of

Product type	Relay Module
Product family	RIFLINE complete
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)
	170000 Cycles (AC15; 250 V / 2 A; 1 NO)
	318000 Cycles (DC13, 24 V / 1 A, 1 NO)
	208000 Cycles (DC13, 24 V / 2 A, 1 NO)
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
	Safe isolation, reinforced insulation and 6 kV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	21.01.2025

Maximum power dissipation for nominal condition	0.41 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage ()	1.5 kV_rms (50 Hz, 1 min., open contact)
Test voltage ()	2.5 kV_rms (50 Hz, 1 min., between contacts: 7, 8 to 9, 10)
Test voltage ()	4 kV_rms (50 Hz, 1 min., between contacts: all others)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC (Input/output)
Rated surge voltage	6 kV (Input/output)
Short-circuit protection device
Current	10 A (RT28-32)
Voltage	500 V (SCPD)
Short-circuit current	1 kA (conditional short-circuit current)

Coil side
Nominal operating voltage U_N	24 V DC
Input voltage range in reference to U_N	See derating diagram
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	17 mA
Input power dissipation for U_N	0.4 W
Typical response time	10 ms
Typical release time	15 ms
Coil voltage	24 V DC
Protective circuit	Freewheeling diode
Status display	LED (yellow)

Switching
Contact switching type	2 N/O contacts, 2 N/C contacts
Type of switch contact	Single contact
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	250 V AC
	300 V DC
Minimum switching voltage	10 V (5 mA)
Limiting continuous current	6 A
Maximum inrush current	35 A (20 ms)
Min. switching current	5 mA (10 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
	100 W (48 V DC)
	75 W (60 V DC)
	55 W (110 V DC)
	50 W (220 V DC)
	1500 VA (250 V AC)
Force-guided contacts in accordance with EN 61810-3	Type A
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 2 A/240 V (N/O contact)
	DC13, 2 A/24 V (N/O contact)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
	0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
	0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG	26 ... 16 (solid)
	26 ... 16 (flexible)

Item dimensions
Width	21 mm
Height	96 mm
Depth	67 mm

Flammability rating according to UL 94	V2 (Housing)

Ambient conditions
Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Relay)	RT II (Relay)
Degree of protection (Installation location)	IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m

UKCA
Certificate	UKCA-compliant

All specifications in accordance with the standard
Standards/regulations	IEC 60947-5-1
	IEC 61810-3
Air clearances and creepage distances between the power circuits
Standards/regulations	EN 61810-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Commercial data

Item number	1148699
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	C465
Product key	DK652E
GTIN	4063151142704
Weight per piece (including packing)	74.7 g
Weight per piece (excluding packing)	71.336 g
Customs tariff number	85364110
Country of origin	CN

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

ECLASS-11.0	27371601
ECLASS-12.0	27371601
ECLASS-13.0	27371601

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	aee288bd-6231-4d69-be6d-0ac61e9f5434

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay module

1148699

Product details

ECLASS

ETIM

UNSPSC

EAC

UL Listed

cUL Listed

cULus Listed

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay module 1148699

Product details

REL-SR- 24DC/2X1AU/2X2AU/FG - Safety relays 1158056

ECLASS

ETIM

UNSPSC

Compatible products

NS 35/ 7,5 PERF 2000MM - DIN rail perforated 0801733

NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated 0801681

NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated 1204119

NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204122

NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated 0801704

NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated 1206421

NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated 1206434

NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 0801762

NS 35/ 7,5 CAP - End cap 1206560

NS 35/15 PERF 2000MM - DIN rail perforated 1201730

NS 35/15 UNPERF 2000MM - DIN rail, unperforated 1201714

NS 35/15 WH PERF 2000MM - DIN rail perforated 0806602

NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1204135

NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated 1201756

NS 35/15 ZN PERF 2000MM - DIN rail perforated 1206599

NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated 1206586

NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201895

NS 35/15 CAP - End cap 1206573

NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated 1201798

MPS-MT - Test plug 0201744

MPS-IH WH - Insulating sleeve 0201663

MPS-IH RD - Insulating sleeve 0201676

MPS-IH BU - Insulating sleeve 0201689

MPS-IH YE - Insulating sleeve 0201692

MPS-IH GN - Insulating sleeve 0201702

MPS-IH GY - Insulating sleeve 0201728

MPS-IH BK - Insulating sleeve 0201731

ZB 5 :UNBEDRUCKT - Zack marker strip 1050004

ZB 5 CUS - Zack marker strip 0824962

ZB 5,LGS:FORTL.ZAHLEN - Zack marker strip 1050017

ZB 5,QR:FORTL.ZAHLEN - Zack marker strip 1050020

ZB 5,LGS:GLEICHE ZAHLEN - Zack marker strip 1050033

ZB 5,LGS:L1-N,PE - Zack marker strip 1050415

UC-TM 5 - Marker for terminal blocks 0818108

UC-TM 5 CUS - Marker for terminal blocks 0824581

UCT-TM 5 - Marker for terminal blocks 0828734

UCT-TM 5 CUS - Marker for terminal blocks 0829595

GBS 5-25X12 - Group marker label for terminal marking 0810588

GBS 5-25X5 - Group marker label for terminal marking 0829126

STP 5-2-ZB - Marker carriers 3037643

ZB 15:UNBEDRUCKT - Zack marker strip 0811972

ZB 15 CUS - Zack marker strip 0824945

ZB 15,LGS:L1-N,PE - Zack marker strip 0811998

REL-SR- 24DC/2X1AU/2X2AU/FG - Safety relays 1158056

RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay module

1148699