1. Home
  2. Products
  3. Relays and optocouplers
  4. Solid-state relays and electromechanical relays
  5. RIF-1-RSC-LV-230AC/2X21MS - Relay Module

RIF-1-RSC-LV-230AC/2X21MS - Relay Module
2905662

Pre-assembled relay module with screw connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact type: 2 changeover contacts. Input voltage: 230 V AC

Product Details

The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.

Product type Relay Module
Product family RIFLINE complete
Application Palm switch
Operating mode 100% operating factor
Mechanical service life approx. 5x 106 cycles
Insulation characteristics
Insulation Safe isolation between input and output
Basic insulation between the changeover contacts
Insulation characteristics
Insulation Safe isolation between input and output
Basic insulation between the changeover contacts
Overvoltage category III
Pollution degree 2
Service life electrical see diagram
Maximum power dissipation for nominal condition 0.81 W
Test voltage (Winding/contact) 4 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact) 2.5 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV (Input/output)
4 kV (between the changeover contacts)
Coil side
Nominal input voltage UN 230 V AC (50/60 Hz)
Input voltage range 184 V AC ... 253 V AC (20 °C)
Input voltage range in reference to UN see diagram
Mains frequency 50/60 Hz
Typical input current at UN 4.5 mA
Typical response time 4 ms ... 12 ms
Typical release time range 4 ms ... 20 ms
Coil voltage 230 V AC
Protective circuit Varistor
Operating voltage display Yellow LED
Switching
Contact type 2 changeover contacts
Type of switch contact Single contact
Drive and function monostable
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (at 10 mA)
Limiting continuous current 5 A (see diagram)
Maximum inrush current 16 A (20 ms, N/O contacts)
Min. switching current 10 mA (12 V)
Interrupting rating (ohmic load) max. 192 W (at 24 V DC)
62 W (at 48 V DC)
42 W (at 60 V DC)
55 W (at 110 V DC)
66 W (at 220 V DC)
2000 VA (for 250 V AC)
Switching capacity min. 120 mW
Utilization category CB Scheme (IEC 60947-5-1) AC15, 1.5 A/250 V (N/O contact)
DC13, 1 A/24 V (N/O contact)
Connection method Screw connection
Stripping length 8 mm
Conductor cross section solid 0.5 mm² ... 4 mm²
Conductor cross-section solid (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG 20 ... 10 (solid)
20 ... 12 (flexible)
Tightening torque 0.5 Nm ... 0.6 Nm
Width 16 mm
Height 90 mm
Depth 75 mm
Flammability rating according to UL 94 V2 (Housing)
Ambient conditions
Degree of protection Relay base IP20 (Relay base)
RT II (Relay)
Ambient temperature (operation) -40 °C ... 45 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Standards/regulations DIN EN 50178
Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any
Item number 2905662
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK6519
Catalog Page Page 333 (C-5-2019)
GTIN 4046356983280
Weight per Piece (including packing) 71.4 g
Weight per Piece (excluding packing) 71.4 g
Customs tariff number 85364900
Country of origin CN

ECLASS

ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601
ECLASS-12.0 27371601
ECLASS-13.0 27371601

ETIM

ETIM 8.0 EC001437

UNSPSC

UNSPSC 21.0 39122300

EAC

Approval ID: TR_TS_D_00573_c

DNV GL

Approval ID: TAA000018V

EAC

Approval ID: RU*C-DE.*08.B.00010
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Compatible Products