ECOR-2-BSC2/4X21 - Relay base

1089994

ECOR-2 relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5

This product needs further products for operation. Mandatory accessories

Product details

Notes on operation	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Notes on operation	The outputs are not suitable for switching different outer conductors.
Notes on operation	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Notes on operation	At least a basic level of insulation is maintained against adjacent modules in the DIN rail direction. If the application has higher requirements on the insulation (reinforced insulation), then these must be realized through suitable measures (e.g. partition plates).

Product type	Relay socket
Product family	ESSENTIAL edition
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	II
Pollution degree	2

Nominal voltage U_N	≤ 230 V AC/DC
Test voltage relay winding/relay contact	2.5 kV_rms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	2.5 kV

Input side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	12
Tightening torque	0.5 Nm ... 0.7 Nm
Output side
Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
	0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	12
Tightening torque	0.5 Nm ... 0.7 Nm

Width	27 mm
Height	75 mm
Depth Retaining bracket	84 mm (with retaining bracket)

Color	traffic grey B (RAL 7043)

Ambient conditions
Degree of protection	IP20 ()
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-25 °C ... 70 °C
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Altitude	≤ 2000 m

Air clearances and creepage distances between the power circuits
Standards/regulations	DIN EN 50178

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Commercial data

Item number	1089994
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	C463
Product key	CKF312
GTIN	4055626897837
Weight per piece (including packing)	68.75 g
Weight per piece (excluding packing)	68 g
Customs tariff number	85366990
Country of origin	CN

Classifications

Approvals

Environmental product compliance

Compatible products

Mandatory accessories

Accessories

ECLASS-11.0	27371603
ECLASS-12.0	27371603
ECLASS-13.0	27371603

EU RoHS
Fulfills EU RoHS substance requirements	Yes (No exemptions)
China RoHS
Environment friendly use period (EFUP)	EFUP-E No hazardous substances above the limits
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-2-BSC2/4X21 - Relay base

1089994

Product details

ECLASS

ETIM

UNSPSC

CSA

cUL Recognized

UL Recognized

cULus Recognized

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ECOR-2-BSC2/4X21 - Relay base 1089994

Product details

ECLASS

ETIM

UNSPSC

Compatible products

REL-IR-BL/L- 12DC/4X21 - Single relay 1109557

REL-IR-BL/L- 48DC/4X21 - Single relay 1109558

REL-IR-BL/L-110DC/4X21 - Single relay 1109560

REL-IR-BL/L-125DC/4X21 - Single relay 1109561

REL-IR-BL/L-220DC/4X21 - Single relay 1109562

REL-IR-BL/L- 24AC/4X21 - Single relay 1109563

REL-IR-BL/L-115AC/4X21 - Single relay 1109564

REL-IR-BL- 24DC/4X21 - Single relay 1032521

REL-IR-BL-230AC/4X21 - Single relay 1032529

REL-IR-BL/L-230AC/4X21 - Single relay 1032531

REL-IR-BL/L- 24DC/4X21 - Single relay 1032527

REL-IR-BL/L- 24DC/2X21 - Single relay 1032526

REL-IR-BL- 24DC/2X21 - Single relay 1032470

REL-IR-BL/L-230AC/2X21 - Single relay 1032530

REL-IR-BL-230AC/2X21 - Single relay 1032528

REL-IR-BL/L- 12DC/2X21 - Single relay 1109547

REL-IR-BL/L- 48DC/2X21 - Single relay 1109548

REL-IR-BL/L-110DC/2X21 - Single relay 1109550

REL-IR-BL/L-125DC/2X21 - Single relay 1109553

REL-IR-BL/L-220DC/2X21 - Single relay 1109554

REL-IR-BL/L- 24AC/2X21 - Single relay 1109555

REL-IR-BL/L-115AC/2X21 - Single relay 1109556

DB 50- 90 BU - Wire bridge 2821180

DB 50- 90 BK - Wire bridge 2820916

DB 50- 90 GY - Wire bridge 2820929

LDP- 12- 24DC - Plug-in module 2833657

DP-12-220 DC - Plug-in module 2907517

LV-120-230AC/110DC - Plug-in module 2833738

V-120-230UC - Plug-in module 2833880

RC-120-230UC - Plug-in module 2833767

MP 2 - Marker labels 2833644

ECOR-2-BSC2/4X21 - Relay base

1089994