Device connector, front mounting - PRC FT25-0-HSG

Panel feed-through, Range of articles: PRC 35, Device connector, front mounting, housing material: PPE, color: black, rated voltage: 690 V AC. Connector housing without contact insert. Please order the appropriate contact inserts according to the accessories list

Product Details

Order information: Connector housing without contact insert. Please order the appropriate contact inserts according to the accessories list
Safety note
Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at under the product
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at
• Operate the connector only when it is fully plugged in.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product type Panel feed-through
Insulation characteristics
Protection class II
Degree of pollution 2

Width 37.6 mm
Height 37.6 mm
Length 51.6 mm

Rated voltage (III/2) 690 V
Nominal voltage ATD 690 V AC in accordance with IEC 61984
600 V AC In accordance with UL 2238
500 V DC in accordance with IEC 61535, when mounted
Rated surge voltage (III/3) 6 kV

Color black
Color of the housing part black
Flammability rating according to UL 94 V0
Insulating material group I / CTI 6000
Seal material Silicon
Cable gland material PPE
Housing material PPE

Degree of protection IP66 / IP68 (2m / 24h) / IP69K
Degree of protection IP66 / IP68 (2m / 24h) / IP69K
Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve)
Ambient temperature (storage/transport) -40 °C ... 70 °C
Ambient temperature (assembly) -5 °C ... 85 °C

Item number 1065795
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key A16
Product Key ABLCAD
GTIN 4055626728384
Weight per Piece (including packing) 28.2 g
Weight per Piece (excluding packing) 28 g
Customs tariff number 39269097
Country of origin PL


ECLASS-9.0 27440103
ECLASS-10.0.1 27440109
ECLASS-11.0 27440109


ETIM 8.0 EC003569


UNSPSC 21.0 39121400

cUL Recognized

Approval ID: E468743-20200116

UL Recognized

Approval ID: E468743-20200116


Approval ID: B.01687

VDE Zeichengenehmigung

Approval ID: 40054228

VDE Zeichengenehmigung

Approval ID: 40054231

cULus Recognized

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Your advantages

Versatile interfaces with straight and angled connector housings
Universal accommodation of existing connector heads with screw connection technology
Modular system for optimized storage
Locking mechanism can be unlocked manually or using a tool
Ideal for indoor and outdoor use due to weatherproof materials