Router - TC ROUTER 3002T-4G

Industrial 4G LTE router, European version, fallback to 3G UMTS/HSPA+ and 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output

Free Download available. Downloads

Product Details

The TC ROUTER for cellular communication implements high-performance, high-speed data links of up to 150 Mbps via mobile 4G LTE networks. This enables you to establish a mobile broadband connection for highly flexible site networking even in places where a wired Internet connection is not available. These connections can be used to transmit sensitive data securely over cellular networks. Furthermore, the TC ROUTER offers a high level of security thanks to IPsec or OpenVPN tunnels, as well as an integrated stateful packet inspection firewall. This means that you can reliably protect your application against unauthorized access.

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type Cellular router
Application Ethernet
MTTF 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Electrical isolation VCC // LTE // Ethernet // PE
Mains type Cellular communication
Supply voltage range 10 V DC ... 30 V DC (Via pluggable Push-in terminal block)
Typical current consumption < 200 mA (24 V DC)
65 mA (With activated energy-saving mode)
Max. current consumption 1.7 A
Connection method Push-in spring connection
Management Web-based management, SNMP

Description of the input Digital input
Number of inputs 2
Voltage input signal 10 V DC ... 30 V DC
Switching level "1" signal 10 V DC ... 30 V DC

Output name Digital output
Number of outputs 1
Voltage output signal 10 V DC ... 30 V DC (depending on the operating voltage)
Current output signal ≤ 50 mA (Not short-circuit proof)

Connection method Push-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 0.75 mm²
Conductor cross section, flexible 0.14 mm² ... 1.50 mm²
Conductor cross section, rigid 0.14 mm² ... 1.50 mm²
Conductor cross section AWG 26 ... 16
Stripping length 9 mm

Signal Ethernet
Web server yes
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Serial transmission speed 10/100 Mbps, auto negotiation
Connection method RJ45 jack, shielded
No. of channels 2
Transmission length 100 m (shielded twisted pair)
Protocols supported TCP/IP, UDP/IP, FTP, HTTP(S)
Interface description GSM / GPRS / EDGE / UMTS / HSPA+ / LTE
Frequency range 2600 MHz (LTE B38)
2500 MHz (LTE B41)
2300 MHz (LTE B40)
2100 MHz (LTE B1)
1800 MHz (LTE B3)
2600 MHz (LTE B7)
900 MHz (LTE B8)
800 MHz (LTE B20)
700 MHz (LTE B28A)
2100 MHz (UMTS/HSPA B1)
900 MHz (UMTS/HSPA B8)
900 MHz (2 W (EGSM))
1800 MHz (1 W (EGSM))
Data rate ≤ 150 Mbps (LTE (DL))
≤ 50 Mbps (LTE (UL))
Antenna 50 Ω impedance SMA antenna socket
Antenna connection method SMA (female)
SIM Interface 1.8 volt, 3 volt
Country support Europe

Dimensional drawing
Width 45 mm
Height 130 mm
Depth 126 mm

Material Plastic (Housing)

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C (Maximum transmission power 5 dBm)
-40 °C ... 60 °C (Maximum transmission power 23 dBm)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)

Certificate CE-compliant
Corrosive gas test
Identification ISA-S71.04-1985 G3 Harsh Group A

Electromagnetic compatibility Conformance with RED Directive 2014/53/EU
Noise immunity EN 61000-6-2
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge ± 6 kV (Test Level 3)
Discharge in air ± 8 kV (Test Level 3)
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 3 GHz (Test Level 3)
Field intensity 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input ± 2 kV (Test Level 3)
Signal ± 2 kV (Ethernet)
Comments Criterion B
Surge current load (surge)
Standards/regulations EN 61000-4-5
Surge current load (surge)
Input ± 0.5 kV (symmetrical)
± 1 kV (asymmetrical)
Signal ± 1 kV (Data line, asymmetrical)
Comments Criterion B
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V
Emitted interference
Radio interference voltage in acc. with EN 55011 Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 Class B, area of application: Industry and residential
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.

Mounting type DIN rail mounting

Item number 2702528
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C19
Product Key DNC422
Catalog Page Page 413 (C-6-2019)
GTIN 4055626211961
Weight per Piece (including packing) 356.8 g
Weight per Piece (excluding packing) 240 g
Customs tariff number 85176200
Country of origin DE


ECLASS-9.0 19170103
ECLASS-10.0.1 19170502
ECLASS-11.0 19170502


ETIM 8.0 EC001478


UNSPSC 21.0 43222609

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Your advantages

Industrial 4G cellular router (LTE)
Fallback to 3G (UMTS/HSPA) and 2G (GPRS/EDGE)
Virtual dedicated line to connect networks via cellular network
IPsec and OpenVPN
Up to 3 VPN tunnels simultaneously
VPN remote start via call or SMS
Stateful inspection firewall for dynamic filtering
NAT table
Two switching inputs and one switching output
Configuration via web-based management or microSD card
2 local Ethernet connections
Switchable energy-saving mode
Integrated logbook
Connection monitoring
Extended temperature range of -40 °C … +70 °C