Infrastructure charging socket for charging electric vehicles (EV) with alternating current (AC), compatible with type 2 Infrastructure Plugs, for installation at charging stations for E-Mobility (EVSE)
CHARX connect, Infrastructure charging socket, front protective cover screw connection, optimized insertion and withdrawal forces, For charging electric vehicles (EV) with alternating current (AC), compatible with infrastructure charging plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), Single wires, length: 0.7 m, Rear panel mounting, Generation 1 Easy Mount, “PHOENIX CONTACT” logo
Infrastructure charging socket for charging electric vehicles (EV) with alternating current (AC), compatible with type 2 Infrastructure Plugs, for installation at charging stations for E-Mobility (EVSE)
| Product type | Infrastructure charging socket |
| Application | For charging electric vehicles (EV) with alternating current (AC) |
| compatible with infrastructure charging plugs | |
| Type | front protective cover screw connection |
| optimized insertion and withdrawal forces | |
| Locking type | Locking in the inserted state with a locking mechanism |
| Insertion force | < 100 N (Optimized) |
| Affixed logo | “PHOENIX CONTACT” logo |
| Charging standard | Type 2 |
| Charging mode | Mode 3, Case B |
| Number of phases | 3 |
| Type of signal transmission | Pulse width modulation |
| Type of charging current | AC 3-phase |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Maximum capacity | 22 kW |
| Power contact | |
| Number | 5 (L1, L2, L3, N, PE) |
| Rated voltage | 480 V AC |
| Rated current | 32 A |
| Signal contact | |
| Number | 2 (CP, PP) |
| Rated voltage | 30 V AC |
| Rated current | 2 A |
| Locking actuator | |
| Possible power supply range at the motor | 22 V ... 26 V |
| Maximum voltage for locking detection | 30 V |
| Typical motor current for locking | 0.05 A |
| Reverse current of the motor | max. 0.5 A |
| Max. dwell time with reverse current | 1 s |
| Recommended adaptation time | 600 ms |
| Pause time after entry or exit path | 3 s |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Cable length | 0.5 m |
| Cable structure | 4 x 0.5 mm² |
| Lock recognition | available |
| Mechanical emergency release | available |
| Dimensional drawing |
|
| Width | 75 mm |
| Height | 96 mm |
| Depth | 76.2 mm |
| Bore dimensions | 60 mm x 60 mm |
| Color Housing | black |
| Contact surface | Ag |
| Material | Plastic |
| Insertion/withdrawal cycles | > 10000 |
| Cable length | 0.7 m (AC cables) |
| 0.5 m (Locking actuator cables) | |
| Cable structure | |
| Cable type | Single wires |
| Cable structure | 5x 6.0 mm² + 2x 0.5 mm² |
| Single wire, cross section | 6 mm² |
| Mechanical data | |
| Insertion force | < 100 N (Optimized) |
| Withdrawal force | < 100 N (Optimized) |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP44 (plugged in) |
| Degree of protection | IP44 (plugged in) |
| IP54 (with protective cover, see accessories) | |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | 5000 m (above sea level) |
| Standards | |
| Standards/regulations | IEC 62196-2 |
| Mounting type Rear panel mounting 0 to 90 degree frontal inclination possible | Rear panel mounting 0 to 90 degree frontal inclination possible |
| Mounting type front available separately | front available separately |
| Possible mounting positions | Rear panel mounting |
| Restrictions to mounting position | Only 0 to 90 degree frontal inclination possible, see figure |
| Max. wall thickness | max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug) |
| max. 22 mm (Rear panel mounting, normative maximum specification for infrastructure plug when using the protective cover (Item No. 1627635) with fastening frame (Item No. 1627637)) | |
| Mounting hole diameter | 7.00 mm (ø) |
| Screw connection of a protective cover | Only possible on the front |
| Position of the locking actuator | top center |
