AC charging controller - EM-CP-PP-ETH

EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.

Free Download available. Downloads

Product Details

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type AC charging controller
Application AC charging controller for commercial applications (EU)
Operating mode Stand-Alone
Charging standard Type 2
Charging mode Mode 3, Case B + C

Type of charging current AC 3-phase
Current consumption < 1 W
Locking release in the event of mains failure With EM-EV-CLR-12V locking release module (Item No. 2903246) as an option
Supply voltage 230 V
Supply voltage range 110 V AC ... 240 V AC (nominal voltage range)
95 V AC ... 264 V AC
Max. current consumption 40 mA
Nominal power consumption < 1 W (No-load)
Frequency range 45 Hz ... 65 Hz

Number of digital inputs 4
Frequency range 50 Hz ... 60 Hz
Nominal current IN ≤ 8 mA
Nominal input voltage UN 24 V
Input voltage range U1 -3 V ... 5 V (Off)
Input voltage range U2 15 V ... 30 V (On)

Output name 4 digital outputs
Connection technology Screw connection
Maximum output voltage 30 V
Maximum output current 0.2 A (Total current for all outputs; internally supplied)
Maximum output current per channel 0.6 A (Per output; externally supplied)
Output name Relay output V1.2
Maximum switching voltage 250 V AC
Max. switching current 2 A
Output name Relay output C1.2
Minimum switching capacity 1500 VA
Maximum switching voltage 250 V AC (External supply)
Max. switching current 2 A
Output name Relay output R1.3 and R2.4
Minimum switching capacity 180 VA
Maximum switching voltage 30 V AC/DC (External supply)
Max. switching current 2 A

Conductor connection
Connection method Screw connection
Conductor cross section solid 0.2 mm² ... 4 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12

Interface Ethernet (1x)
Interface RS-485 2-wire
Bus system RS-485
Connection method Screw connection
Number of interfaces 1
Number of supported devices 1
Transmission speed 9.6 kbps (Standard)
Transmission speed range 2.4 kbps ... 19.2 kbps (adjustable)
Data flow control/protocols Modbus/RTU (slave)
Interface Ethernet
Bus system RJ45
Connection method RJ45 jack
Number of interfaces 1
Serial transmission speed 10/100 Mbps
Transmission length max. 100 m (with shielded, twisted-pair data cable)
Protocols supported Modbus/TCP

Charging controllers
Number of charging points 1

Width 71.6 mm
Height 90 mm
Depth 61.00 mm

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 30 % ... 95 % (non-condensing)

Conformance CE-compliant

Low Voltage Directive Conformance with LV directive 2006/95/EC
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Housing DIN 43880
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2

Standards/regulations IEC 61851-1

Mounting type DIN rail mounting
Mounting position any

Item number 2902802
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Sales Key A17
Product Key XWBBBA
Catalog Page Page 61 (C-7-2019)
GTIN 4046356681032
Weight per Piece (including packing) 322.8 g
Weight per Piece (excluding packing) 260 g
Customs tariff number 85371098
Country of origin DE


ECLASS-9.0 27144703
ECLASS-10.0.1 27144703
ECLASS-11.0 27144703


ETIM 8.0 EC002889


UNSPSC 21.0 39121800

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values