Infrastructure charging socket - EV-T2M3SE24-3AC32A-0,7M6,0E10
1405216

CHARX connect, Infrastructure charging socket, rear protective cover screw connection, for charging electric vehicles (EV) with alternating current (AC), compatible with infrastructure charging plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), Single wires, length: 0.7 m, Rear panel mounting, 0 to 90 degree frontal inclination possible, SE-Line, “PHOENIX CONTACT” logo


Product Details


Infrastructure charging socket for charging electric vehicles (EV) with alternating current (AC), compatible with type 2 Infrastructure Plugs, for installation at charging stations for E-Mobility (EVSE)



Product type Infrastructure charging socket
Application for charging electric vehicles (EV) with alternating current (AC)
compatible with infrastructure charging plugs
Locking type Locking in the inserted state with a locking mechanism
Affixed logo “PHOENIX CONTACT” logo
Charging standard Type 2
Charging mode Mode 3, Case B

Number of phases 3
Type of signal transmission Pulse width modulation
Type of charging current AC 3-phase
Note on the connection method Crimp connection, cannot be disconnected
Maximum capacity 22 kW
Type of charging current AC 3-phase
Charging power 26.6 kW
Charging current 32 A
Power contact
Number 5 (L1, L2, L3, N, PE)
Rated voltage 480 V AC
Rated current 32 A
Signal contact
Number 2 (CP, PP)
Rated voltage 30 V AC
Rated current 2 A
Locking actuator
Possible power supply range at the motor 22 V ... 26 V
Maximum voltage for locking detection 30 V
Typical motor current for locking 0.05 A
Reverse current of the motor max. 0.5 A
Max. dwell time with reverse current 1 s
Recommended adaptation time 600 ms
Pause time after entry or exit path 3 s
Service life insertion cycles > 10000 load cycles
Ambient temperature (operation) -30 °C ... 50 °C
Cable length 0.5 m
Cable structure 4 x 0.5 mm²
Lock recognition available
Mechanical emergency release available
Locking actuator
Operating voltage 24 V
Note number of positions 4-pos.
Position of the locking actuator top center

Dimensional drawing
Width 75 mm
Height 96 mm
Depth 76.2 mm
Bore dimensions 60 mm x 60 mm

Color Housing black
Contact surface Ag
Material Plastic

Insertion/withdrawal cycles > 10000

Cable length 0.7 m (AC cables)
0.5 m (Locking actuator cables)
Cable structure
Cable type Single wires
Cable structure 5x 6.0 mm² + 2x 0.5 mm²
Single wire, cross section 6 mm²

Mechanical data
Insertion force < 100 N
Withdrawal force < 100 N

Ambient conditions
Degree of protection (when plugged in) IP44 (plugged in)
Degree of protection IP44 (plugged in)
IP54 (with protective cover, see accessories)
Ambient temperature (operation) -30 °C ... 50 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude 5000 m (above sea level)

Standards
Standards/regulations IEC 62196-2

Mounting type Rear panel mounting 0 to 90 degree frontal inclination possible
Front mounting only possible when the locking actuator is removed (see EV-T2M3SE…E00 versions)
Mounting type rear available separately
Possible mounting positions Rear panel mounting
Front mounting only possible when the locking actuator is removed (see EV-T2M3SE...E00 versions)
Restrictions to mounting position Only 0 to 90 degree frontal inclination possible, see figure
Max. wall thickness max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)
max. 10 mm (Front mounting, when using the locking mechanism)
Mounting hole diameter 7.00 mm (ø)
Screw connection of a protective cover Only rear mounting possible
Position of the locking actuator top center

Item number 1405216
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key A17
Product Key XWBADC
Catalog Page Page 36 (C-7-2019)
GTIN 4046356738491
Weight per Piece (including packing) 656.4 g
Weight per Piece (excluding packing) 0.56 g
Customs tariff number 85444290
Country of origin DE


ECLASS

ECLASS-9.0 27144706
ECLASS-10.0.1 27144706
ECLASS-11.0 27144706

ETIM

ETIM 7.0 EC002898

UNSPSC

UNSPSC 21.0 39121522

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 10;
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Complete product range
Uniform, space-saving installation space
Available with your logo on request – for consistent branding of your charging station
Integrated interlock during charging
Manual emergency release of the locking actuator
Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001