CHARX ST1C-DC200-25FMAS00P - DC charging cable

1889391

CHARX connect standard, CCS type 1, DC charging cable, up to 500 A in Boost mode, 200 A permanent, 1000 V DC, with vehicle charging connector and open cable end, cable: 25 ft, black, straight, with analog temperature sensors, with replaceable mating face frame, with replaceable DC power contacts, with exchangeable actuation lever, no liquid cooling, PHOENIX CONTACT logo, SAE J1772, IEC 62196-3, for charging electric vehicles (EV) with direct current (DC)

Product family	CHARX connect standard
Technology	Combined Charging System
Application	for charging electric vehicles (EV) with direct current (DC)
	for installation at charging stations for electromobility (EVSE)
Design	with analog temperature sensors
	with replaceable mating face frame
	with replaceable DC power contacts
	with exchangeable actuation lever
	no liquid cooling
Charging standard	CCS type 1
Charging mode	Mode 4
	DC level 3
Affixed logo	PHOENIX CONTACT logo
Label	8.9 mm x 28.9 mm (customer logo on request)

Temperature monitoring	2x Pt 1000
Charging power and current (DC charging)
Type of charging current	DC
Charging current	200 A DC
Charging power	200 kW
Rated voltage	1000 V
Charging power and current (DC charging in Boost Mode)
Type of charging current	DC Boost Mode
Charging current	up to 500 A DC
Charging power	up to 500 kW
Rated voltage	1000 V
Note	The specifications refer to charging in Boost Mode and are dependent on ambient conditions. For further details, see the packing slip in the download area.
Pin assignment (Leistungskontakte)
Note on the connection method	Crimp connection, cannot be disconnected
Number	3 (PE, DC+, DC-)
Rated voltage	1000 V DC
Rated current	200 A (up to 40 °C)
Pin assignment (Signalkontakte)
Note on the connection method	Crimp connection, cannot be disconnected
Type of signal transmission	Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Number	2 (CP, CS)
Rated voltage	30 V AC
Rated current	2 A
Coding	480 Ω (Lever actuated)
	150 Ω (Lever not actuated)
Temperature sensors (Pt 1000)
Sensor type	Pt 1000
Standards/regulations	DIN EN 60751
Attachment point	Sensor for the DC contacts
Switch-off temperature	90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Long-term stability	0.06 % (after 1000 hours at 130 °C)
Recommended measured current	1 mA (1 V at 0°C)
Coefficient	3850 ppm/K
Ambient temperature	-50 °C ... 130 °C (Operation)

Vehicle charging connector
Width	69.6 mm
Height	192.6 mm
Depth	284.6 mm

Color (Housing)	black (RAL 9005)
Color (Handle area)	black (RAL 9005)
Color (Mating face)	black (RAL 9005)
Color (Protective cap)	black (RAL 9005)
Color (Cable)	black (RAL 9005)
Material Vehicle charging connector	Plastic
Material Cable outer sheath	TPE
Material Contact surface	Silver
Flammability rating according to UL 94	V0 (Mating face)
Outer sheath, material	TPE
Note	The color appearance and gloss level of the charging cable may vary.

Cable length	25 ft ±45 mm
Wiring standards/regulations	UL 62
	FFSO7.E343212
Cable weight	max. 1900.00 kg/km
Cable type	straight
Cable structure	2 x 1 AWG + 1 x 3 AWG + 3 x 2 x 18 AWG
External cable diameter	35.30 mm ±0.5 mm
Outer sheath, material	TPE
Stripping length of the sheath	180 mm ±10 mm
Stripping length	180 mm ±10 mm
Cable resistance	≤ 0.00044 Ω/m (based on a power core, at an ambient temperature of 20°C)
Bending radius	min. 353 mm (10x Ø)

Mechanical data
Insertion/withdrawal cycles	> 10000
Insertion force	< 75 N
Withdrawal force	< 75 N

Ambient conditions
Degree of protection (Vehicle charging connector)	IP54 / Type 3R (The degree of protection is only ensured in the ready and plugged-in state when both plug-in components are original products from Phoenix Contact or suitable standard-compliant products.)
Ambient temperature (operation)	-30 °C ... 40 °C
	max. 55 °C (Current reduction required, observe the DC contact temperature limit value of 90°C)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	5000 m (above sea level)

Standards
Standards/regulations	SAE J1772
	IEC 62196-3

Item number	1889391
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	XWBMJ
GTIN	4067923559929
Weight per piece (excluding packing)	16,000 g
Country of origin	Country of origin will be provided upon delivery.