CHARX SEC-3100 - AC charging controller

1139012

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode: Stand-Alone, Client, Server, interface: Ethernet (2x), Cellular communication (4G/2G), CHARX control modular system bus, MICRO-USB type C, communication protocol: OCPP 1.6J, Modbus/TCP, MQTT, Connectable peripheral devices: Energy meter, RFID, DC residual current detection, DIN rail mounting, The product is being prepared for compliance with the Cyber Resilience Act (CRA).

Free download available. Downloads

Note on application	As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA.

Product type	AC charging controller
Product family	CHARX control modular
Design	with Embedded Linux system
Charging mode	Mode 3, Case B + C
Operating mode	Stand-Alone
	Client
	Server
Modem for communication present	yes
Connectable peripheral devices	Energy meter
	RFID
	DC residual current detection

Processor	Arm® Cortex®-A7, 528 MHz i.MX6 UL
RAM	512 Mbyte (RAM)
Data storage system	8 GByte (eMMC)
Operating system	Linux
Management	Web-based management

Supply
Supply voltage	12 V DC ±5 %
Supply voltage range	11.4 V DC ... 12.6 V DC
Current consumption	max. 2 A (Stand-alone operation)
	< 200 mA (No load, without external loads)
Insulation characteristics
Pollution degree	2 (in acc. with IEC 60664-1)
Overvoltage category	III

Digital
Number of digital inputs	4
Description of the input	Digital input
Nominal input voltage U_N	12 V
Input voltage range U1	0 V ... 3 V (Off)
Input voltage range U2	9 V ... 15 V (On)

Digital
Output name	Digital output
Number outputs	4
Maximum output voltage	≤ 12 V (Low-side operation)
Maximum output current	max. 600 mA

Push-in Technology
Conductor cross-section rigid	0.14 mm² ... 1.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 16
Cable cross-section range	0.25 mm² ... 1.5 mm² (with ferrules)
Stripping length of the individual wire	8 mm
	10 mm (for contactor control)

Interface	Ethernet (2x)
	Cellular communication (4G/2G)
	CHARX control modular system bus
	USB-C
Wireless
Interface description	GSM / GPRS / EDGE / LTE (FDD)
Note	You will find a suitable antenna in the accessories are for this item
Frequency	700 MHz (LTE B28, hardware revision 1.4 or later)
	800 MHz (LTE B20)
	900 MHz (LTE B8)
	1800 MHz (LTE B3)
	2100 MHz (LTE B1, hardware revision 1.4 or later)
	2600 MHz (LTE B7, hardware revision 1.4 or later)
	900 MHz (GSM/GPRS/EDGE )
	1800 MHz (GSM/GPRS/EDGE )
Antenna	50 Ω impedance SMA antenna socket
SIM Interface	Micro SIM (3FF)
LTE	CAT1
Protocols supported	OCPP 1.6J
Interface for Ethernet
Interface	Ethernet
Connection method	RJ45 jack
Number of interfaces	2
Number of supported devices	2
Serial transmission speed	10/100 Mbps
Transmission length	100 m
Operating mode	WAN/LAN
	LAN/LAN
Protocols supported	OCPP 1.6J
	Modbus/TCP
	MQTT
	HTTP
	HTTPS
Interface for configuration and diagnostics
Interface	Configuration and diagnostics
Connection method	USB type C
Number of interfaces	1
Protocols supported	RNDIS
Interface for energy meter
Interface	Energy meter
Bus system	RS-485
Transmission speed range	9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected energy meter)
Interface for RFID reader
Interface	RFID readers
Bus system	RS-485
Transmission speed range	9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected RFID reader)
Interface for CHARX control modular system bus
Interface	CHARX control modular system bus
Connection method	DIN rail bus connector
Number of interfaces	1
Interface for vehicle
Interface	Vehicle interface
Communication protocol	IEC 61851-1
	GB/T 18487
Proximity	IEC 61851-1
	GB/T 18487
Control voltage	± 12 V (Locking actuator)
Locking release in the event of mains failure	Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Rated current	2 A
Interface for residual current detection
Interface	Residual current detection
Sensor supply voltage	12 V DC
Signal level	12 V (Different terminal points)
	12 V
Interface for temperature monitoring
Interface	Temperature monitoring
Sensor type	Pt 1000
	PTC chain
Tripping characteristic	configurable
Interface for contactor control
Interface	Contactor control
Interface description	Floating switch contact
Switching voltage	max. 250 V AC
	max. 30 V DC
Rated current	2 A
Interrupting rating	max. 1500 VA

Charging controller
Width	37.6 mm
Height	121 mm
Depth	85 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 65 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Permissible humidity (operation)	5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)
Air pressure (operation)	70 kPa ... 106 kPa (up to 3000 m above mean sea level)
Air pressure (storage/transport)	58 kPa ... 106 kPa (up to 4500 m above mean sea level)

Standards
Standards/regulations	IEC 61851-1

Mounting type	DIN rail mounting
Assembly note	DIN rail mounting
Mounting position	any

Item number	1139012
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	EM01
Product key	XWBRDA
GTIN	4063151080181
Weight per piece (including packing)	264 g
Weight per piece (excluding packing)	255 g
Customs tariff number	85371091
Country of origin	PL

Compatible products

Accessories

Your advantages

Legal certainty and maximum protection against cyber risks

Future-proof connectivity for billing, load management, and the smart grid

Cost-efficient scalability without complex conversions

Update capability for long-term compatibility and investment protection

Maximum flexibility for brand presence and customer experience

ECLASS-13.0	27144703
ECLASS-15.0	27144703

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	29cc0dbf-63f3-4588-8ae5-6fa84c1a3237

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX SEC-3100 - AC charging controller

1139012

Product details

ECLASS

ETIM

UNSPSC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

CHARX SEC-3100 - AC charging controller 1139012

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EV-RCM-6DC-WAT - Differential current monitoring 1309697

EV-RCM-6DC-WAT-X10 - Differential current monitoring 1309695

EV-RFID-ELT-PCB - RFID device 1309772

EV-RFID-ELT-PCB-X10 - RFID device 1309752

EV-RFID-ELT-IP65 - RFID device 1309687

TC ANT MOBILE WALL 5M - Antenna 2702273

CHARX SEC JST-RCM-CBL - Cable set 1360462

ISKRA WM3M4C ENERGYMETER - Measuring device 1429603

CHARX 4,3 LCD DISPLAY - Display 1426836

EV-T2M3SO12-3P-P-SET - Infrastructure charging socket 1164422

EV-T2M3SO12-4P-P-SET - Infrastructure charging socket 1164423

EV-T2M3SO12-3P-BL-SET - Infrastructure charging socket 1268358

EV-T2M3SO12-4P-BL-SET - Infrastructure charging socket 1268355

EV-T2M3SO12-3P-B-SET - Infrastructure charging socket 1164420

EV-T2M3SO12-4P-B-SET - Infrastructure charging socket 1164417

CHARX RFID/NFC-PCB - RFID/NFC device 1391227

CHARX RFID/NFC-PCB-X10 - RFID/NFC device 1399372

CHARX SEC JST-RCM-CBL 100 - Cable set 1486193

STEP3-PS/1AC/12DC/1.3/PT - Power supply 1170952

STEP3-PS/1AC/12DC/2.5/PT - Power supply 1170953

STEP3-PS/1AC/12DC/5/PT - Power supply 1170955

UNO2-PS/1AC/12DC/30W/PT - Power supply 1399935

Your advantages

Frequently searched

CHARX SEC-3100 - AC charging controller

1139012