Sensor/actuator terminal block - DOK 1,5-LA 24GN/O-M 2717074

Sensor/actuator terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

Show Product Details (PDF)

Product Details




Order Key 2717074
Packing unit 50 pc
Note Made to Order (non-returnable)
Catalog Page Page 484 (C-1-2019)
GTIN 4017918062095
Weight per Piece (including packing) 16.2 GRM
Weight per Piece (excluding packing) 16.2 GRM
Custom tariff number 85369010
Country of origin PL



CSA

Approval Specification Data
AWG/kcmil 28-14

UL Recognized

Approval Specification Data
AWG/kcmil 28-14

cUL Recognized

Approval Specification Data
AWG/kcmil 28-14

EAC

EAC

EAC


Your advantages

Same shape as DIK ... three-level initiator terminal blocks
The forks of the insertion bridge can be easily loosened for bridging between non-adjacent terminal blocks
Terminal blocks with red and green LEDs are available for optical signaling of the initiator and actuator wiring
The upper level contains the feed-through connections for the signal cable which can be labeled
Alternate wiring of an actuator followed by an initiator is easy
Unlike the DIK terminal blocks, the lower level of these output terminal blocks makes direct contact with the DIN rail and as a PE connection are marked yellow-green
Because the spine of the insertion bridge can be snapped into place with the terminal block housing, all the terminal points can be wired freely and the bridge can be securely positioned
The middle level supplies the connected actuators with power