EAC
cULus Recognized
| Usegroup | B | C | D | F |
|---|---|---|---|---|
| Nominal voltage UN | 300 V | 150 V | 300 V | 600 V |
| Nominal current IN | 41 A | 41 A | 10 A | 41 A |
PCB header, nominal cross section: 6 mm2, color: green, nominal current: 41 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, Number of potentials: 9, Number of rows: 1, Number of positions per row: 9, number of connections: 9, product range: PCV 5/..-G, pitch: 7.62 mm, mounting: Wave soldering, pin layout: Linear pinning, solder pin [P]: 5 mm, Stecksystem: POWER COMBICON 5, Locking: without, type of packaging: packed in cardboard
| Mounting type |
| Thermal test | Test group C | |
| Specification | IEC 60512-5-1:2002-02 |
| Tested number of positions | 12 |
| Electrical properties | |
| Rated voltage (III/2) | 630 V |
| Rated surge voltage (III/2) | 6 kV |
| Contact resistance | 0.4 mΩ |
| Pollution degree | 2 |
| Air clearances and creepage distances | | |
| Specification | IEC 60664-1:2007-04 |
| Insulating material group | I |
| Comparative tracking index (IEC 60112:2003-01) | CTI 600 |
| Rated insulation voltage (III/3) | 630 V |
| Rated surge voltage (III/3) | 6 kV |
| minimum clearance value - non-homogenous field (III/3) | 5.5 mm |
| minimum creepage distance (III/3) | 8 mm |
| Rated insulation voltage (III/2) | 630 V |
| Rated surge voltage (III/2) | 6 kV |
| minimum clearance value - non-homogenous field (III/2) | 5.5 mm |
| minimum creepage distance (III/2) | 3.2 mm |
| Rated insulation voltage (II/2) | 1000 V |
| Rated surge voltage (II/2) | 6 kV |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum creepage distance (II/2) | 5 mm |
| Maximum load current | 41 A |
| Rated voltage (II/2) | 1000 V |
| Rated voltage (III/2) | 630 V |
| Rated surge voltage (II/2) | 6 kV |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| Nominal voltage UN | 630 V |
| Nominal current IN | 41 A |
| Nominal current IN | 41 A |
| Type of packaging | packed in cardboard |
| Dimensional drawing |
|
| Width | 71.38 mm |
| Height | 34.25 mm |
| Installed height | 29.25 mm |
| Length of the solder pin | 5 mm |
| Length | 14.29 mm |
| Length of the solder pin | 5 mm |
| Pin dimensions | 0.8 x 1 mm |
| Hole diameter | 1.3 mm |
| Pitch | 7.62 mm |
| PCB design | |
| Pin spacing | 7.62 mm |
| Durability test | |
| Specification | IEC 60512-5:1992-08 |
| Impulse withstand voltage at sea level | 7.3 kV |
| Contact resistance R1 | 0.4 mΩ |
| Contact resistance R2 | 0.5 mΩ |
| Insertion/withdrawal cycles | 50 |
| Climatic test | |
| Specification | ISO 6988:1985-02 |
| Corrosive stress | 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle |
| Thermal stress | 100 °C/168 h |
| Power-frequency withstand voltage | 3.31 kV |
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 - 60.1 Hz) |
| Sweep speed | 5 g (60.1 - 150 Hz) |
| Test duration per axis | 2.5 h |
| Ambient temperature (operation) | -40 °C ... 100 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Contact holder in insert | |
| Specification | IEC 60512-15-1:2008-05 |
| Result | Test passed |
| Test force per pos. | 35 N |
| Torque test | |
| Specification | IEC 60999-1:1999-11 |
| Polarization and coding | |
| Specification | IEC 60512-13-5:2006-02 |
| Result | Test passed |
| Insertion and withdrawal forces | |
| Result | Test passed |
| No. of cycles | 50 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 6.5 N |
| Test for conductor damage and slackening | |
| Specification | IEC 60999-1:1999-11 |
| Result | Test passed |
| Pull-out test | |
| Specification | IEC 60999-1:1999-11 |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm2 / solid / > 10 N |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm2 / flexible / > 10 N |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 10 mm2 / solid / > 90 N |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 6 mm2 / flexible / > 80 N |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 6 mm2 / solid / > 80 N |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 4 mm2 / flexible / > 60 N |
| Visual inspection | |
| Specification | IEC 60512-1-1:2002-02 |
| Result | Test passed |
| Resistance of inscriptions | |
| Specification | IEC 60068-2-70:1995-12 |
| Result | Test passed |
| Dimension check | |
| Specification | IEC 60512-1-2:2002-02 |
| Result | Test passed |
| Environmental Product Compliance | |
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
| China RoHS | No hazardous substances above threshold values |
| Material data - housing | |
| Housing color | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | hot-dip tin-plated |
| Metal surface contact area (top layer) | Tin (4 - 8 µm Sn) |
| Metal surface soldering area (top layer) | Tin (4 - 8 µm Sn) |
| Type | Standard |
| Number of positions | 9 |
| Number of connections | 9 |
| Number of levels | 1 |
| Plug-in system | POWER COMBICON 5 |
| Mounting flange | without |
| Number of potentials | 9 |
| Pin layout | Linear pinning |
| Usegroup | B | C | D | F |
|---|---|---|---|---|
| Nominal voltage UN | 300 V | 150 V | 300 V | 600 V |
| Nominal current IN | 41 A | 41 A | 10 A | 41 A |