VARIOFACE interface module for analog input modules, 1:1 connection, spring-cage connection, redundant connector. Suitable for Yokogawa CENTUM CS3000 AAI141, AAI841 cards.
Product details
Product type
Interface module
No. of channels
16
Operating mode
100% operating factor
Insulation characteristics: Air clearances and creepage distances
Insulation
Functional insulation
Overvoltage category
II
Pollution degree
2
Max. permissible current
100 mA (Per path, protected by PTC or slow-blow fuse 100 mA, observe derating)
Max. permissible total current
1.6 A (Protected by slow-blow fuse 2 A, 5x20 (short-circuit protection only))
Nominal voltage UN
24 V DC
19.2 V DC ... 30 V DC
Air clearances and creepage distances
Rated insulation voltage
50 V DC
Rated surge voltage
0.5 kV
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card
AAI141
AAI841
Supported controller YOKOGAWA STARDOM
Suitable I/O card
NFAI141
NFAI841
Contact switching type
Double contact, 1 N/O contact
Contact material
AgNi, 5 µm hard gold-plated
Maximum switching voltage
48 V DC
≤ 25 V AC
Limiting continuous current
1 A
Min. switching current
1 mA
Interrupting rating (ohmic load) max.
24 W (24 V DC)
48 W (48 V DC)
25 VA (25 V AC)
Mechanical service life
approx. 2x 107 cycles
Field level
Connection method
Spring-cage connection
Conductor cross-section rigid
0.2 mm² ... 2.5 mm²
Conductor cross-section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section AWG
24 ... 14
Field level
Connection method
COMBICON
Conductor cross-section rigid
0.2 mm² ... 2.5 mm²
Conductor cross-section flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Controller level
Connection method
Yokogawa, KS compatible
Number of connections
2
Number of positions
40
Tightening torque
0.5 Nm
Status display present
yes, if the fuse fails
Operating voltage display
Green LED
Item dimensions
Width
151.77 mm
Height
127.5 mm
Depth
61.9 mm
Ambient conditions
Degree of protection
IP00
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
-20 °C ... 50 °C
Altitude
≤ 2000 m
Air clearances and creepage distances
Standards/regulations
EN IEC 60664-1
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Notes on operation
No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
Notes on operation
At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Item number
2901419
Packing unit
1 pc
Minimum order quantity
10 pc
Note
Made to order (non-returnable)
Product key
DK218N
GTIN
4046356590655
Weight per piece (including packing)
382.7 g
Weight per piece (excluding packing)
169.96 g
Customs tariff number
85369010
Country of origin
DE
ECLASS
ECLASS-13.0
27141152
ECLASS-15.0
27141152
ETIM
ETIM 9.0
EC002780
UNSPSC
UNSPSC 21.0
39121400
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
