up to 80 km (Depending on the fiber/SFP module used)
Signal LEDs
Data receive, link status
No. of channels
2 (Combo ports)
Ethernet (combo)
Connection method
SFP/RJ45
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps (full duplex)
Transmission physics
Depending on the SFP module
Transmission length
up to 40 km (Depending on the fiber/SFP module used)
Signal LEDs
Data receive, link status
No. of channels
2 (Combo ports)
Product type
Switch
Product family
Managed Switch 7000
Type
Book type
MTTF
138.85 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
83.9 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
14.59 Years (SN 29500 standard, temperature 70°C, operating cycle 100%)
Special properties
EtherNet/IP™
Insulation characteristics
Protection class
III (VDE 0106, IEC 60536)
Switch functions
Diagnostic functions
Remanente Event-Table
RMON History
N:1-Portmirroring
LLDP (Link Layer Discovery Protocol)
SNMP-Traps
ACD (Address Conflict Detection)
EtherNet/IP™ supported protocols
Common Industrial Protocol (CIP)
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Signal contact control voltage
24 V DC (typical)
Signal contact control current
1 A (maximum)
PROFINET conformance class
Conformance Class A
PROFINET device function
Fast Startup
Filter functions
Quality of Service (8 priority classes)
Port-Priorisierung
VLAN (up to 32 VLANs)
IGMP Snooping/Querier (v1/v2)
Auto-Query-Port
Extended Multicast Filtering
Static Multicast Filtering (32 groups)
Link Aggregation (up to 4 trunks)
IP parameterization
DHCP client
DHCP Option 82 (Relay Agent)
DHCP server (pool-based, port-based)
BootP
MAC address table
16k
Management
Web-based management (HTTP/HTTPS)
SNMPv1/v2/v3
Redundancy
DLR (Device Level Ring)
RSTP (Rapid Spanning Tree Protocol)
FRD (Fast Ring Detection)
Large Tree Support
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) EtherNet/IP™ status LED: Net, Mod
Additional functions
MAC-based Port-Security
Time synchronization
PTP 1588 (Transparent clock on the DLR ports)
Security functions
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Current consumption
560 mA
Power consumption
13.44 W
Local diagnostics
US1/2 Supply voltage US1, US2 Green LED
FAIL Div. LED red
LINK Link status LED
Maximum power dissipation for nominal condition
13.44 W
Test section
500 V DC 1 min
Transmission medium
Copper
FO
Supply
Supply voltage (DC)
24 V DC (redundant)
Supply voltage range
12 V DC ... 58 V DC
Power supply connection
Via COMBICON, max. conductor cross-section 2.5 mm²
Residual ripple
3.6 VPP (within the permitted voltage range)
Typical current consumption
560 mA (at US = 24 V DC)
Current consumption
560 mA
Function
Signal contact control voltage
24 V DC (typical)
Signal contact control current
1 A (maximum)
Connection method
Screw connection
Conductor cross-section, rigid
0.2 mm² ... 2.5 mm²
Conductor cross-section, flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Stripping length
7 mm
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-40 °C ... 70 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Air pressure (operation)
86 kPa ... 108 kPa (1500 m above sea level)
Air pressure (storage/transport)
66 kPa ... 108 kPa (3500 m above sea level)
Free from substances that could impair the application of coating
Yes
Conformity/Approvals
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Conformance with EMC directives
IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion A
IEC 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
IEC 61000-6-2 IEC 61000-4-4 (burst) Criterion A
IEC 61000-6-2 IEC 61000-4-5 (surge) Criterion A
IEC 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) Criterion A
Noise immunity
EN 61000-6-2:2005
Noise emission
Standards/regulations
EN 61000-6-4
Functionality
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Status display
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) EtherNet/IP™ status LED: Net, Mod
Item number
2702175
Packing unit
1 pc
Minimum order quantity
1 pc
Product key
DNN122
GTIN
4055626003665
Weight per piece (including packing)
1,143.9 g
Weight per piece (excluding packing)
1,010 g
Customs tariff number
85176200
Country of origin
DE
UNSPSC
UNSPSC 21.0
43222600
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
15(a), 6(a)-I, 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
