Cable gland, cable gland material: Nickel-plated brass, external cable diameter 18 mm ... 25 mm, shielding: yes, connecting thread: Pg29, color: silver, with O-ring
| Assembly instructions | 1) Mount screw connection flange in the housing using the correct torque 2) Insert cable 3) Tighten union nut using the correct torque |
| Method 1 Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring. Method 2 Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| Cable structure | |
| External cable diameter | 18 mm ... 25 mm |
| Ambient conditions | |
| Halogen-free | no |
| Shielded | yes |
| Cable diameter without cable sheath | 16 mm (Diameter of braided shield) |
| Dimensional drawing |
Dimensional drawing
|
| Hole diameter | 37.1 mm ... 37.4 mm |
| Length of the connecting thread | 8 mm |
| Wrench size, union nut | 40 mm |
| Length | 47 mm |
| Hexagon angular dimension | 44.5 mm |
| Thread type connection side | Pg29 |
| Wrench size, support | 40 mm |
| Ambient temperature (operation) | -40 °C ... 100 °C (static) |
| Degree of protection | IP68 |
| Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” | |
| O-ring material | Perbunan |
| Cable gland material | Nickel-plated brass |
| Cable seal material | CR |
| Color | silver |
| Material, insert | Polyamide 6 |
| Manufacturer | BIMED |
| Manufacturer Designation | BSEM-07 |
| No. of conductors | 1 |