Circular connectors (device side) - SACC-DSI-MSB-5CON-L180/SH VT 1456475

Sensor/actuator flush-type plug, with violet contact carrier, 5-pos., M12 SPEEDCON, shielded, B-coded, rear/screw mounting with M16 thread, with straight solder connection

Product Details

Mounting type Rear mounting Pg9 With flat nut
Assembly instructions With flat nut

Shielded yes

Insertion/withdrawal cycles > 100
Header 1
Type Flush-type plug, straight

Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 60 V
Nominal current IN 4 A

Dimensional drawing
M12 flush-type connector
Length of the solder pin 6 mm
Length of the solder pin 6 mm

Degree of protection IP67 (When plugged in)
Degree of protection IP65 (When plugged in)
Degree of protection IP65/IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)

Connection technology
Connection method Solder pins
Conductor connection
Connection method Solder pins

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Standards/specifications IEC 61076-2-101

Flammability rating according to UL 94 V0
Sealing material NBR
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated

Number of positions 5
Coding B - inverse
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Order Key 1456475
Packing unit 20 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Catalog Page Page 62 (PC-2011)
GTIN 4046356617147
Weight per Piece (including packing) 14.4 GRM
Weight per Piece (excluding packing) 14.4 GRM
Customs tariff number 85366990
Country of origin DE


cULus Recognized

Approval Specification Data
Nominal voltage UN 60 V
Nominal current IN 4 A
Min. cross section 22 mm²
Max. cross section 20 mm²

Your advantages

Easy PCB assembly: one-piece connectors for wave soldering
All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
For high transmission reliability: optional shield connection to the housing by means of shield contact