Circular connectors (device side) - SACC-DSI-MS-12CON-M12/0,5 SCO 1437122

Sensor/actuator flush-type plug, 12-pos., M12 SPEEDCON, rear/screw mounting with M12 thread, with 0.5 m halogen-free TPE litz wire, 12 x 0.14 mm2

Product Details




Mounting type Rear mounting M12 x 1 With flat nut
Assembly instructions With flat nut

Cable length 0.5 m
Shielded no
Electrical properties
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Conductor resistance ≤ 57.6 mΩ/m
Cable insulation resistance ≥ 20 MΩ*km
Cable structure
Cable type TPE litz wire
Conductor structure signal line 7x 0.16 mm
AWG signal line 26
Material wire insulation TPE
Thickness, insulation 0.21 mm (Core insulation)
Wire diameter incl. insulation 1.1 mm ±0.05 mm
Single wire, color Brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (cable, flexible installation)
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)

Insertion/withdrawal cycles > 100
Header 1
Type Flush-type plug, straight

Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V
Nominal current IN 1.5 A

Degree of protection IP67 (When plugged in)
Degree of protection IP65 (When plugged in)
Degree of protection IP65/IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation)
Ambient temperature (operation) -25 °C ... 85 °C (cable, flexible installation)
Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation)

Connection technology
Connection method Individual wires
Conductor connection
Connection method Individual wires

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Standards/specifications IEC 61076-2-101

Flammability rating according to UL 94 V0
Sealing material NBR
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated

Number of positions 12
Coding A - standard
Insulation characteristics
Overvoltage category II
Degree of pollution 3


Order Key 1437122
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Catalog Page Page 47 (C-2-2019)
GTIN 4046356449625
Weight per Piece (including packing) 23.9 GRM
Weight per Piece (excluding packing) 23.5 GRM
Customs tariff number 85444290
Country of origin DE



EAC

cULus Recognized

Approval Specification Data
Nominal voltage UN 30 V
Nominal current IN 1.5 A
AWG/kcmil
Max. cross section 26 mm²

Your advantages

Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
Standard pin assignments for signal and power transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut
SPEEDCON fast locking system reduces cabling times