Circular connectors (device side) - SACC-DSI-M12FSD-4CON-L180 VA 1424071

Bus system flush-type socket, Ethernet, 4-pos., M12, D-coded, rear/screw mounting with Pg9 thread, with straight solder connection

Product Details




Mounting type Rear mounting, Pg9 thread with lock nut
Assembly instructions With flat nut

Shielded no
Cable structure
Signal type/category Ethernet

Insertion/withdrawal cycles > 100
Header 1
Type Flush-type socket, straight

Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 250 V
Nominal current IN 4 A

Dimensional drawing
M12 flush-type socket
Length of the solder pin 6 mm
Length of the solder pin 6 mm

Degree of protection IP65/IP67/IP69/IP69K
Degree of protection IP67
Ambient temperature (operation) -25 °C ... 85 °C
Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation)

Connection technology
Connection method Solder pins
Conductor connection
Connection method Solder pins

General This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Standards/specifications IEC 61076-2-101

Flammability rating according to UL 94 V0
Sealing material FKM
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Cable gland material Stainless steel

Number of positions 4
Coding D - data
Insulation characteristics
Overvoltage category II
Degree of pollution 3


Order Key 1424071
Packing unit 20 pc
Minimum order quantity 20 pc
GTIN 4046356675413
Weight per Piece (including packing) 15.3 GRM
Weight per Piece (excluding packing) 15.3 GRM
Customs tariff number 85366990
Country of origin DE



EAC


Your advantages

Easy PCB assembly: one-piece connectors for wave soldering
All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design