Strip and crimp conductors in just one step with our stripping and crimping devices. With the mobile stripping and crimping devices, it takes just two seconds to assemble your conductors. The CF 3000-2,5 stripping and crimping device processes taped ferrules with insulating collars in accordance with DIN 46228-4.
Classic conductor preparation takes two work steps, two tools, and a lot of time. The portable stripping and crimping device from Phoenix Contact revolutionizes this process: only one tool, one work step, and time savings of around 75 %.
The portable stripping and crimping device is a hand-held device for stripping conductors and crimping ferrules in one step, which takes less than two seconds. Automatic monitoring functions ensure high-quality crimping every time.
The automated stripping and crimping function makes operating the device easier: feed in an unprocessed conductor, strip and crimp it automatically – and you're done!
The portable stripping and crimping device continually indicates its operating state via colored LEDs. The only operating elements are for switching the device on/off and resetting it.
The portable stripping and crimping device is equipped with a capacitive sensor system for detecting the cross section of inserted conductors. The device automatically detects if a conductor does not fit, reliably preventing faulty crimping. The error is shown via an LED.
This guarantees high-quality crimp execution. The quadratic crimping function offered by this device can be used for all terminal points and terminal shafts. The pull-out forces exceed the specified standard conditions.
Work in or at a control cabinet should not be hindered by cables or hoses. The portable stripping and crimping device has a high-performance, easy-to-replace lithium-ion polymer battery for up to 2,000 crimping operations.
This means your portable hand-held device is ready to use for several days. The fast charger provided with the device charges the battery to full capacity in just one hour.
The portable stripping and crimping device has an integrated magazine for ferrules in strip form. The automatic feed enables multiple conductors to be crimped one after another without interruption.
The portable stripping and crimping device has a lightweight, removable collecting chamber for waste insulation. This guarantees a clean working environment, which enables the device to be used inside a control cabinet.
For portable applications, use the CF 3000 compact stripping and crimping device. With this device, you can quickly and safely process bulk ferrules in tape format.
The conductor is stripped and then crimped with a ferrule in just one step.
The automatic device can be adapted to various cross sections in under a minute.
For bulk processing, use the sturdy and robust CF 1000 stripping and crimping device.
The conductor is stripped and then crimped with a ferrule in just one step. You can process up to 1,200 conductors per hour with this automatic device.