Special function module - AXL SE CNT1
1088131

Axioline Smart Elements, Function module, Counter input: 1, Control input: 1, Counting direction input: 1, Digital output: 1, 24 V DC, 100 mA, degree of protection: IP20

This product needs further products for operation. Mandatory Accessories
Downloads

Product Details


You can integrate Axioline Smart Elements into systems with the Smart Element interface. This Smart Element detects and processes fast pulse sequences from sensors. The Smart Element has a counter input (source), a control input (gate), a counting direction input (direction) and a configurable output (OUT).



Dimensional drawing
Width 14.9 mm
Height 62.2 mm
Depth 62 mm

Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Color traffic grey A RAL 7042

Smart Element interface
Number of interfaces 1
Connection method Card edge connector
Transmission speed See system in which you use the Smart Element.
Start time until ready to operate < 500 ms

Module
ID code (hex) none

Counter
Input name Counter input
Description of the input EN 61131-2 type 1
Connection method Push-in connection
Number of inputs 1 (Source)
Input voltage 24 V DC
Input voltage range "0" signal -3 V DC ... 5 V DC
Input voltage range "1" signal 15 V DC ... 30 V DC
Input frequency max. 150 kHz
Input current typ. 2.3 mA
Resolution 32 bits

Digital
Output name Digital output
Output description Push-pull output (switches to GND at level 0)
Connection method Push-in connection
Number of outputs 1 (OUT)
Protective circuit Short-circuit and overload protection; electronic
Surge protection; Suppressor diode
Output voltage 24 V DC

Type modular
Product type I/O component
Mounting position See the system in which the Smart Element is used.
Insulation characteristics
Overvoltage category II (IEC 60664-1, EN 60664-1)
Pollution degree 2 (IEC 60664-1, EN 60664-1)

Potentials: Communications power supply of the Smart Elements (USE)
Supply voltage using card edge connectors
Current draw max. 30 mA
Potentials: I/O supply (UP)
Supply voltage 24 V DC (using card edge connectors)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 700 mA
typ. 620 mA
Current consumption min. 20 mA (without connected peripherals)
Power consumption max. 21 W (of which 1.48 W internal losses)
Power consumption min. 480 mW
Protective circuit Surge protection; See the system in which the Smart Element is used.
Reverse polarity protection; Polarity protection diode
Supply:
Designation Sensor/actuator supply US
Supply voltage 24 V DC

Connection technology
Connection name I/O
Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor connection
Connection method Push-in connection
Conductor cross section solid 0.25 mm² ... 1.5 mm²
Conductor cross section flexible 0.25 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
Stripping length 8 mm
I/O
Connection method Push-in connection
Note on the connection method Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid 0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm²
Stripping length 8 mm

Ambient temperature (operation) -25 °C ... 60 °C
Degree of protection IP20
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

Protection class III (IEC 61140, EN 61140, VDE 0140-1)

Mounting type Smart Element slot
Mounting position See the system in which the Smart Element is used.

Item number 1088131
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key DRIB63
Product Key DRIB63
GTIN 4055626887722
Weight per Piece (including packing) 34.6 g
Weight per Piece (excluding packing) 34.6 g
Customs tariff number 85389091
Country of origin DE


ECLASS

ECLASS-9.0 27242605
ECLASS-10.0.1 27242605
ECLASS-11.0 27242605

ETIM

ETIM 8.0 EC001601

UNSPSC

UNSPSC 21.0 32151600

UL Listed

Approval ID: FILE E 238705

cUL Listed

Approval ID: FILE E 238705

cULus Listed


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

32-bit counter (up and down)
Maximum input frequency: 150 kHz
Activation of an output is based on a comparative value
Counter control using a hardware or software gate
Single or periodic count
Protected 24 V sensor/actuator supply
Device rating plate stored